Sabit Tip Tek Kaldırma Hızı veya Çift Kaldırma Hızı Metalürjik Tel Halat Elektrikli Vinç

• After-sales Service: Online Service
• Warranty: 18 Months
• Uygulama: Köprü Vinci, Tek Öğütücü Vinç
• Tip: Metallurgical Hoist
• Sapan Tipi: Tel Halat
• Kaldırma Hızı: 2 ~ 8 m/dak
• Hayır. Modeli.: Metallurgical hoist
• Maksimum Kaldırma Yüksekliği: 20 milyon
• Zincir düşüyor: 1
• Sertifika: CE, ISO9001:2000
• Koşulunu: Yeni
• Renk: Green
• kaldırma ağırlığı: 5 t
• kaldırma yüksekliği: 6 ay
• çalışma sınıfı: A4
• çalışma gerilimi: 380 v 50 hz 3 ph
• avantaj: yüksek sıcaklık direnci
• kaldırma hızı: 0.8 m/dak
• Taşıma Paketi: Export Packing in Wooden Cases
• Teknik Özelikler: customizable
• Ticari Marka: KUANGYUAN
• Menşei: Xinxiang, Henan Province
• Üretim Kapasitesi: 500, 000 Sets/Year

Ürün Açıklaması

Stationary type Single lifting speed or double lifting speed Metallurgical wire rope electric hoist

Product description of Metallurgical wire rope electric hoist

The metallurgical electric hoist can be installed on the I-beam track to lift heavy objects, and it can reciprocate in a straight line and a curve along the track to ensure sufficient safety. Molten metal can be lifted, but it is forbidden to use it in a low temperature below -10°C or an environment above 50°C. It is suitable for working in an environment without fire, explosion hazard and corrosive medium.

The metallurgical electric hoist drum is made of cast steel or seamless steel pipe. Power is transmitted by splines, and the drum shell is welded by steel plate. The drum device is the central part of the hoist. The upper part is connected with the trolley running mechanism, and the lower part is connected with the hook device through the wire rope. The upper part of the outer cover

Safety System:
1. The working level of this electric hoist is M6, and the working environment temperature is not higher than 60ºC.
2. The lifting mechanism is equipped with two supporting brakes and one safety brake. The first stage is the magnetic pull brake of the cone rotor motor, that is, the working brake. The second stage is the friction dry head brake installed at the input of the reducer to prevent the failure of the first stage brake and continue to make the load rise and fall normally. move. The safety brake is a safety brake emergency braking device installed on the reel assembly to prevent the mechanism from failing and the transmission device is damaged in an emergency state.
3. Secondary limit device for upper limit position. The first time is the conventional electric hoist up and down travel limiter limit, and the second time is the heavy sag limit.
4. Thermal radiation protection of the main engine, the whole machine is equipped with a heat insulation board under the shell of the electric hoist drum, and two metal sheets are used to sandwich high-temperature asbestos materials to isolate the high-temperature radiation of the molten metal.
5. The insulation grade of the hoisting motor and the running motor is H-class, and the hoisting motor winding is equipped with an overheating protection device.
6. The steel wire rope adopts 6×37S+IWR-GB8918-2006 high-strength high-temperature resistant steel wire rope for important purposes.
7. The electrical control device is equipped with zero-voltage protection, loss-of-voltage protection, and over-current protection with phase-out protection. The control equipment cable adopts ZR+-YCP combustible heavy-duty rubber cable.
8. The control method adopts remote control or centralized control

Product technical parameters:

Lifting height		m	6/9/12/18/24/30
Lifting speed		M/min	8	8	8	8	7
Running speed		M/min	20	20	20	20	20
Wire rope	Rope diameter	mm	7.4	11	13	15.5	15.5
	Structure type		18*7+IWS	18*7+IWS	18*7+IWS	18*7+IWS	18*7+IWS
beam track model GB706-65			16-28b	20a-32c	20a-32c	25a-45c	32b-63c
			M6	M6	M6	M6	M6
Working level	Type		YZD 22-4	YZD 31-4	YZD 32-4	YZD 41-4	YZD 51-4
rise Rise Electricity move machine	capacity	kw	1.5	3	4.5	7.5	13
	Rotating speed	Rpm	1380	1380	1380	1380	1380
	Phase Voltage		3ph 380v 50hz
	Current	Current	4.3	7.6	11	18	30
	frequency	Week/second	50	50	50	50	50
Working level	type		YZD 12-4	YZD 12-4	YZD 12-4	YZD21-4	YZD21-4
transport Row Electricity move machine	capacity	kw	0.4	0.4	0.4	0.8	0.8
	Rotating speed	Rpm	1380	1380	1380	1380	1380
	Phase Voltage		3ph 380v 50hz
	Current	Current	1.25	1.25	1.25	2.4	2.4
	frequency	Week/second	50	50	50	50	50

Product picture:

Company introduce:
Henan Mine Crane meet the demand factory, workshop, port, mining, waste disposal, goods scattered, petrochemical, aerospace and other industries of universal bridge crane, overhead crane price 20 ton 5ton, eot crane, door crane, universal gantry crane, rubber tyre and rail mounted container gantry crane, four link type portal crane, quayside container crane, crane, crane hook, mining grab crane, gantry crane, ship loader, grab bucket ship unloader, stacker reclaimer, dredger, mobile platforms and other types of hydraulic crane.

Certificate:
We have passed CE, GOST, SGS, and OHSAS & ISO9001:2000 international quality control, ISO14001:1996 environment and ISO9001:2001 health and safety certifications. We have a  perfect quality-control system, a strict management system, and strong production capability and advanced testing measures to ensure the high production and high quality.