HRC series reverse circulation DTH Hammer is the latest developed product of our company. It is mainly used for deep exploration drilling and ore grade control.
It has the following characteristics:
1. Based on previous experience of ordinary hammers, combined with the features of reverse circulation hammer, optimized internal structure and ideal energy transfer, thus ensuring the series of hammers drilling with fast, smooth and continuous sampling.
2. The internal structure is very simple with components of high rigidity, thus ensuring long life and easy maintenance of the hammer.
3. The collection tube adopts an integrative design and can be replaced without disassembling the hammer. With carburizing treatment, it has good abrasive resistance.
4. Equipped with bits designed with patent. Simply by replacing the drill bit, the same hammer can drill holes of different sizes ensuring that the sample is not contaminated.
5. In difficult conditions such as loose soil, hard rock and plenty of water exists, sampling can be done well.
| Length(exclude bit) |
Weight(exclude bit) |
External Diameter |
Bit Shank |
Hole Range |
Connection Thread |
| 1020 mm |
94.00 kg |
Φ99 mm |
HRC45 |
Φ114mm _ Φ127mm |
Upon the thread of the drill tube |
| Working Pressure |
Impact rate at 0.5 MPa |
Recommended Rotary Speed |
Air Consumption |
| 1.0 MPa |
1.8 MPa |
2.4 MPa |
| 1.0 - 3.0 MPa |
30 Hz |
25-40 rpm |
8 m³/min |
12 m³/min |
16 m³/min |
Denetlenen Tedarikçi 
