HPMC/Starch Ether for Construction Mortar

Hydroxypropyl Methylcellulose(HPMC)

Hydroxypropyl methylcellulose (HPMC) is a type of nonionic cellulose erher made from natual high molecular materials through a series of chemical processes.With ahnost all properties of methyl cellulose (MC).it is the auxiliary agent of first choice in the production of top-quality construction malerials.To satisfy the requirement of envitonment protection.Tasong brand product is developed and produced paricularly for the constrution mateial industry.With such favorable features as high water retention,good dispersancy,high degree of fineness.niss placeability and convenience to dissolve.it is applicable to the production of innovative construction materials like dry-powder mortar.waterproof putty powder (paste) for indoor and outdoor walls.binding agent, gap filler.interface finishing agent,water paint, self-leveling agent,etc.In the production of construction materials.celluloseether is an indispensable additive .After HPMC is added the following properties can be enhanced.

Water Retention:The Water retention Will be enhanced.Which is helpful with such problems as cement or gypsum construction material drying too fast and poor hardening or cracking due to insufficient hydration.
Operationality: It can enhance the plasticity of mortar and improve the coating efficiency in construction projects.
Adhesivity: It can made mortar attach to base material better since the plasticity of mortar is enhanced.
Slip Resistance: It can prevent slipping problem between mortar and the base material in construction project as a result of its thickening effect


Quality Indices and Technical Parameters
 
  
 

Physical and Chemical Propertiesl

1.Appearance:HPMC is white or whitish fibrillar/granular and odorless powder.
2.Dissolvability:HPMC is dissolvable in cold water and become clear or slightly cloudy liquidcement,but hardly in absolute ethyl alcohol,ethylether or propanone. In addition,HPMC is dissolvable in some organic solvevts or soce mixed solvents of water and organic solvent.
3.Granularity:Throughput rate:≥98.5%for 100 mesh and up to 100%for 80 mesh.
4.Apparent Density:0.30-0.70g/cm3,and density:1.26-1.31g/cm3.
 
Product Features:

1.Salt Resistance: HPMC is a type of nonionic cellulose ether rather than polyelectrolyte.Therefore,it is relatively stable in water where metal salt or organic electrolyte exists.However.exceessive amount of electroyte will lead to gelatinization and sedimenation.
2.Surface Activity: HPMC water solution has surface activity.which enables it to act as colloidal protective agent,emulsifying agent and dispersant agent.
3.Thermal Gelafinization: HPMC wate solution will turn to opaque gel and settle when heated to certain temperatnre,but it will restore to the original solution when it is, cooled down continually. The temperature leading to such gelatinization and sedimentation depends mainly on the types.concentration and heating rate of HPMC water solution.
4.PH Stability: The viscosity of HPMC water solution is hardly affected by acid or alkali.and it is relatively stable when pH value is in the range of 3.10 to 11.0.
5.Water Retention:HPMC is a type of high-efficiency water retention agent that is widely used in the production of ceramics,construction materials and many other fields.
6.Adhesivity:HPMC,as a type of high-performance binding agent,is applicable to the production of coloring pigments,tobacco products,ceramic products and papermaking.

Dissolving Methods

Coacervation will happen before dissolving if HPMC product is directly charged into water .However,it is evry slow and difficult to dissolve in this way. Three dissolving methods are recommended here below for users to choose based on the specific applications.
1.Hot Water Method:Add water into a vessel to 1/3or2/3 of the required level before heating it up over80?C,Since HPMC is indissolvable in hot water ,HPMC will be dispersed in hot water homogeneously. Then add cold water or ice water to the hot water slurry to the expected level.Keep agitating to cool the mixture down.
2.Powder Mixing Method:Mix HPMC powerd up with other powdery material(s) of the same or higher amount in dry state for full dispersal .Then add water into the mixture for dissolving.HPMC will be dissolvable instead of coacervation.
3.Organic-solvent Humidification Method:Disperse or humidify HPMC with organic solvent such as alcohol,ethanediol or oil before add in water .Then HPMC will go dissolvable successfully.

Note:The surface-treated HPMC,after humidified with cold water ,with become viscous if add ammonia water or alkaline water for pH value within 8 to 10.
 
Main Applications
HPMC may serve as thickening agent,dispersant agent,dispersant agent,emulsifying agent or film-forning agent,and its industrialized products may be applicable to the production of daily chemicals,synthetic resin,construction and coating materials.

Suspension Polymerization

In file production of synthetic resin such as polyvinyl chloride (PVC),polyvinylidene chloride (PVDC) and other copolymerisate,suspension polymerization is the most used and it requires to keep hydrophobic monomers to suspend in the water. HPMC product has excellent surface activity as a type of water-soluble polymer. In addition,it  plays  the  role  of colllidal  protectant that it can delay the coacervation of particles.Furthermore,alghough HPMC is a type of water-soluble polymer,it is somewhat  dissolvable in hydrophobic monomers and can enhance the monomer porosity for production of polymerizing particles,thus,it may render polymer good capacity for removal of residual monomers and absorption of plasticizer.

It is applicable to the production of following products in the recipe of construction materials

Waterproof putty powder.
Cement sand mortar.
Cement base brick/tile and the bonding between tile and base brick.
Plaster for gypsum board base.
Cement-based structual plaster.

 
TEL: 86-311-13303239317