Golf Sahası havuzları için 1,0 mm Siyah HDPE astar Kalınlık yağı &Gaz Pedleri Gömlekleri

• After-sales Service: Online Technical Support
• Warranty: 10 Years
• Sertifika: ISO
• Yüzey: Pürüzsüz
• Uygulama: Ulaşım Projesi, Hidrolik Proje, Jeoteknik Proje, Çevre Projesi, Agriculture Project
• Özellik: Delinmeye karşı dayanıklılık, Darbe direnci, Yırtılmaya karşı dayanıklılık, UV Resistance
• Hayır. Modeli.: RHGM
• Malzeme: HDPE
• Renk: Black or as Required
• kalınlık: 0.12 mm
• genişlik: 5 m/rulo
• uzunluk: 50 m/rulo veya gereksiniminiz doğrultusunda
• başka bir ad: jeozon kaplama baraj süs havuzu astarı
• ham madde: HDPE LDPE LLDPE PVC PE
• standart: ASTM Gri-GM13
• anahtar sözcük: jeomembrana astar kaplama süs havuzu astarı
• ana özellik: uv direnci/sızıntı önleyici/geçirilemez
• örnek: serbest numune
• kullanım ömrü: 5-30 yıl
• "mod: 1000 m2
• çoğunlukla uygulama: katı atık/balık havuzu/madencilik/baraj/sulama
• paket: dokuma çanta
• Taşıma Paketi: dokuma çanta
• Teknik Özelikler: 100% virgin materials
• Ticari Marka: RH
• Menşei: China
• HS Kodu: 3920109090
• Üretim Kapasitesi: 50000m2/Day

Ürün Açıklaması

1.0mm Black HDPE Liner for Golf Course Ponds Thickness Oil & Gas Pad Liners

Product Parameters

HDPE Geomembrane Specification

Tested Property	Test Method	Frequency	Minimum Average Value
Thickness, (minimum average) mm	ASTM D 5199	every roll	0.75	1.0	1.5	2.0	2.5	3.0
Density, g/cm3	ASTM D 1505	every 5th roll	0.94	0.94	0.94	0.94	0.94	0.94
Tensile Properties (each direction):
Strength at Break, N/mm-width	ASTM D 6693, Type IV	every 5th roll	21	28	43	57	71	85
Strength at Yield, N/mm-width			11	15	23	30	38	45
Elongation at Break, %	G.L. 51 mm (2.0 in)		700	700	700	700	700	700
Elongation at Yield, %	G.L. 33 mm (1.3 in)		13	13	13	13	13	13
Tear Resistance, N (lb)	ASTM D 1004	every 5th roll	93 (21)	125 (28)	187 (42)	249 (56)	311 (70)	373 (84)
Puncture Resistance, N (lb)	ASTM D 4833	every 5th roll	263(59)	352(79)	530(119)	703(158)	881(198)	1,059 (238)
Carbon Black Content, %	ASTM D 1603 / D 4218	every 5th roll	2.0-3.0	2.0-3.0	2.0-3.0	2.0-3.0	2.0-3.0	2.0-3.0
Notched Constant Tensile Load, hrs	ASTM D 5397, Appendix	90,000 kg	400	400	400	400	400	400
Oxidative Induction Time, minutes	ASTM D 3895, 200° C; O2, 1 atm	90,000 kg	>100	>100	>100	>100	>100	>100
TYPICAL ROLL DIMENSIONS
Roll Length, m			280	210	140	105	85	70
Roll Width, m			7.0/8.0	7.0/8.0	7.0/8.0	7.0/8.0	7.0	7.0

 

HDPE Geomembrane is a impermeable polymer liner and the largest type of geosynthetics. 

HDPE Smooth Geomembrane contains approximately 97.5% polyethylene, 2.2% carbon black and trace amounts of antioxidants and heat stabilisers. It has outstanding chemical resistance, mechanical properties, environmental stress crack resistance, dimensional stability and thermal aging characteristics.

HDPE textured geomembrane is treated with spray roughening process on the surface of smooth geomembrane, which can greatly increase the engineering adaptability of geomembrane. Its mechanical properties are consistent with the HDPE smooth geomembrane and meanwhile it is of an outstanding direct shear friction coefficient.

In addition to the application scope of HDPE smooth geomembrane, the HDPE textured geomembrane is more suitable for various anti-seepage and anti-corrosion projects with certain inclination such as embankment slope and sloping surface etc. or with certain anti-slip and anti-movement requirements.

Packaging & Shipping

HDPE Geomembrane Packing and Delivery

1. The products are usually tied with packing tape.The packaging size and container capacity of the product are different from the product specifications
2. Container transportation, according to your project request. 

3. Port: Qingdao, China.

 

Application

Geomembrane Liner Application

• Environmental protection, environmental hygiene (such as garbage landfill site, treatment of sewage, containment of poisonous or harmful wastes, hazardous warehouse, industry wastes, construction & explosive rubbish, etc).
• Water conservancy (such as waterproofing, stopping up leak, reinforcement for lake, river, channels, tunnels, dams and reservoirs; vertical wall with core, slope protection, etc.
• Municipal engineering (expressway, subway, underground engineering of building; and liner of roof pool, roof garden's waterproofing, sewage channel, etc)
• Garden (backing & slope protection of artificial lake, pool, golf course's pond.
• Petrochemicals (liner secondary lining of chemical reeaction tank and deposit tank from chemical plant & refinery; seepage control of oil tank from gas station
• Mining (backing seepage of washing pond, heap leaching pond, ashery, dissolved pond, deposit pond from the stack and tailing.
• Traffic facilities (highway foundation reinforcement, culvert stopping up leak
• Agriculture (stolling up leak for reservoirs, drinking pools, storage ponds and irrigation system.
• Aquaculture industry (seepage control for sea cucumber circle's slope protection, liner of fish pool & shrimp pond.
• Seepage, corrosion, leaks control & reinforcement for other facility, leachate collection.
• Temporary container structure, prefabrication of special parts.
  

  
  Geomembrane Liner Features
• High anti-seepage coefficient (1×10-17cm/s)
• High tensile strength. High tear resistance
• Good flexibility and elasticity, adapt to uneven geological settlement
• Resistant to strong acid, alkali, and oil corrosion, with excellent chemical corrosion resistance
• Good heat resistance and cold resistance.  With wide applicability to climatic conditions
• Resistance to ultraviolet radiation. Good anti-aging performance
• Environmental protection, high-quality virgin plastic and carbon black particles do not contain any preservatives and do not pollute water and soil
• Easy to weld, easy to install and construct.
• Cost-effective

Hot Selling

Geomembrane welding machine
1. Hot wedge welder
2. Extrusion welder gun
3. Hot air welder gun

Company Profile

Tai'an City RuiHeng Building Materials Co., Ltd is specialized in the research, development, production and sales of geosynthetic materials, plastic products and plastic machinery. Our company is devoted to geosynthetic material research and development and application.

Our main products are hdpe geome
mbrane liner,plastic geogrid, geotextile,3D geomat,geocell,geomembrane welding machine,extrusion welder and welding rod,etc. Our products have been widely used by clients in more than 20 countries and regions. Our products are applied in aquaculture, railways, highways, water conservancy, electric power, metallurgy, ports and municipal engineering construction. We have won the praises of customers.

 

FAQ

1.Textured or Smooth hdpe Geomembrane?
A textured product is either needed or is not. This apparent truism needs to be remembered in many cases in which a product is specified for a project which clearly does not qualify to be designated as textured yet is designated as such, creating a huge confusion about the uncertainty of the client's needs.
If the client does not clarify they require, it is hardly feasible to offer the right solution in conditions comparable to any concurrent company.

2.Is a hdpe Geomembrane with a wider roll better?
There is a technical limit for manufacturing geomembranes. In high density polyethylene (HDPE), this is 7.5 to 8m. Beyond this limit, either the raw material is not an HDPE and is instead a softer material which enables the extrusion-header system of the machine to complete the geomembrane transformation cycle, or the uniform thickness or thermal treatment parameters of the raw material have been seriously compromised. Within these limits and exceeding a minimum width, under which it would be unreasonable to present a product for the Safe Containment application, the roll width is the choice of the manufacturer, usually subject to the presentation format and transport cost optimisation.
There is hardly any difference between the cost of machines for given widths.
Within these limits, it is true that a wider roll relieves installation costs in large projects by a small percentage; however it is always at the expense of a higher cost of handling bulk unit weight of the roll or overruns in the finishing of curves or corners.

3.Differences between LLDPE  and HDPE geomembrane?
Linear low density polyethylene (LLDPE) and high density polyethylene (HDPE) are raw materials which are similar in terms of composition, but very different in their behaviour, as has already been discussed in previous sections.
HDPE has become a global standard for Safe Containment applications precisely for its unique properties and marketing an LLDPE as an HDPE in these applications is tantamount to offering a substitute product without any benefit to the client. Differentiating them is very simple.