55W DSP Xenon Plaka (FS01)

DSP ballast
--- the first TRUE DSP ballast in China

Why our ballast better than others? ?

1. The circuit controlled by digital chips.
2. Starting current is only 3.9A-4.4A. Only 3seconds to reach standing current 3.5A, prolonging bulbs' lifespan.
3. Memory fuctions. For example, it was 2.8A when last changing lights, it would restart from 2.8A, protecting bulbs and original car circuits.
4. Constant power is very stable. Bulbs always work when 8V and lights will not change. It's constant power keep 35W both high and low voltege case.
5. Current will not change even the road is not flat. There is no bad effect. For bulbs and original car circuits

Ballast Technical Parameter

Shape: Ultra Slim Size
Working Voltage Rate: 6-18V (normal ballast: 9-16V)
Input Voltage: 13.5V
Cold Boot current: < 5.0A
Hot Boot current: < 4.0A
Stable working current: 3.2A
Output Power: 35W
Rated working efficiency: Over 86%

Ballast Size:
Length = 8.2 centimeters
Width = 5.8 centimeters
Depth = 1.5 centimeters

DSP Ballast Parameters:

1. Working voltage ranged: 9 to 16V DC
2. Working current: 3.2A (at 12V DC)
3. Input voltage: 12V DC
4. Input current when turn on the light: <5.5A
5. Instantaneous voltage when turn on the light: 23 ± 1kV
6. Output power: 35 ± 0.5W
7. Working temperature range: -40 to +105 degrees Celsius
8. Output load: One HID 35W lamp
9. EMI electromagnetic compatible standard to the ballast: S95, 54 and EC
10. Reverse polarity protection; Short/open-circuit protection
11. Shock, water and dust-resistant protection

DSP Ballast Features

1. Cold light low current, quick start light
2. DSP intelligent start, no impact on light bulb, prolong the life more than three times
3. Intelligent power compensation, stable brightness output
4. Low pressure drop power, safety protection original car circuit
5. Fewer Components, less consumption, high efficiency, low temperature and low failure rate.
6. With CAN-BUS design, fully inhibit transmission, radiated interference

Warranty: 18 months

The following tests are carried out before delivery.

1) 6 hours continuous working aging test
2) Connection circuit protection test
3) Over voltage protection test
4) Flash light concussion test
5) Quakeproof capability test
6) Cold, warm boot test
7) Polarity protection test
8) Short and circuit protection test
9) EMC anti-jamming test
10) Ballast and bulb matching test

Other tall ballast seller you can check out our website.

Any question please feel free to contact us, best wishes in advance.