Black Iron Pipe Fittings Medium Type 90 Degree Bend with FM UL Certifications for Fire System

• After-sales Service: Yes
• Connection: Thread
• Head Code: Round
• Thread Distribution: Internal Thread
• Material: Iron
• Technics: Casting
• Hayır. Modeli.: 90 degree Bend
• Application: Water Pipe
• Customized: Non-Customized
• Certification: CQC, CCC, PSE, TUV, VDE
• Warranty: 3 Years
• zincir: BSPT and NPT
• malzeme standardı: astm a-197, astm a47′ye göre dövülebilir demir
• çalışma basıncı: 363psi
• teslimat süresi: otuz gün
• çinko kaplama: 70 um
• Taşıma Paketi: Customized
• Teknik Özelikler: 1/2′′ to 4′′
• Ticari Marka: JIANZHI
• Menşei: Hebei
• HS Kodu: 730719
• Üretim Kapasitesi: 400000 Tons Per Year

Ürün Açıklaması

 
 

Product Description

 

Features

Code:1
Size: 3/8''-4''
Material: BS EN 1562,EN-GJMB-350-10,KTH350-10
Dimension: BS EN 10242
Thread: ISO 7-1,BS 21,BSPT
Pressure Rating: PN16/PN25
Surface Treatment:Hot-dip Galvanized,Electro Galvanized,Black
Certificate: UL Listed / FM Approved / NSF 61
Application: Fire Protection,Waterworks,HVAC,Plumbing,GAS,Irrigation,or other piping systems 

 

PRODUCTS DETAILS

Malleable Iron pipe fittings 1 Bend 90° M/F. The 90° Bend is one kind of malleable iron pipe fittings, which can connect two pipe joints of the same nominal diameter to make the pipe can be turned 90 degree and commonly used in plumbing installation,Fire Protection,Waterworks,HVAC,Plumbing,GAS,Irrigation,or other piping systems. Malleable Iron pipe fitting bend is a kind of casting bend, through melting, annealing, and then machined into pipe fittings. This material pipe fittings have good malleable castability, are relatively easy to process, and have a certain strength. Fittings are used in piping systems with working pressures between 1.6MPa to 2.5MPa. The connection of the piping system is connected by threads,one side is female thread. The other side is male thread.

DRAWING

 
 

Size	A(mm)	PCS/CTN.	Size	A(mm)	PCS/CTN.
3/8''	48	400	1 1/2''	116	24
1/2''	55	280	2''	140	12
3/4''	69	150	2 1/2''	176	8
1''	85	80	3''	205	6
1 1/4''	105	50	4''	260	2

We do toughness test to compare our fittings with other brand's fittings. Our pipe fittings has better toughness, if you are interested, we can send you test video for your reference.Our pipe fittings threads are higher accuracy than other brand fittings. Our pipe fittings threads strictly compliance with EU standards at numbers of thread, according EN10242, for 1" nipple, the length thread is at least 14.5mm, the numbers of thread is at least 6.3, our pipe fittings fully comply EU standards, but other brand fitting has short length, and numbers aren't enough either. 
Axes angle, turns of external thread and turns of internal thread are also higher 20% than EU standards.The axes of the screw thread is accurate to within ±0.5° of the specified angle according to ISO7-1,the axes of the screw thread accuracy of our fittings is ±0.3°,higher 40% than ISO7-1.

FM & UL

The black and galvanized fittings we produced are both UL (Underwriters Laboratories) and FM (Factory Mutual Insurance Company) approved. FM/UL has an independent testing facility where products are tested to make sure they meet the highest level of standards for safety and property loss prevention. No matter EN standard or ASME, as long as the product can pass the strict test in the laboratory, it can obtain FM/UL certificate.