Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi LIUGONG Motor Grader CLG4165
Specification for CLG4165
| Engine | DCE.Cummin.s 6BTAA5.9-C180 | |
| Rated Power | (kW) | 125(170)@2200 |
| Blade Width | mm(inches) | 3960(156) |
| Maximum Speed | km/h (mph) | 38 (23.6) |
| Draw Bar Pull | (kN) | 81.6 |
| Operating Weight | kg(Lb) | 15000 |
| ENGINE | ||
| Tier | II | |
| Make | Dongfeng Cummin.s | |
| Gross Power | kW(Hp)@rpm | 125(170)@2200 |
| Net Power | kW(Hp)@rpm | 113(151)@2200 |
| Peak Torque | 750N.m/1300rpm | |
| Torque Rise % | 30% | |
| Number of Cylinders | 6 | |
| Aspiration | turbo air-to-air aftercooled | |
| TRANSMISSION | ||
| Transmission Type | power shift | |
| Transmission Configuration | 6f/3r | |
| Torque Converter | three-member single turbine | |
| Maximum Travel Speed, fwd | (km/h) | 38 |
| Maximum Travel Speed, rev | (km/h) | 24.7 |
| Number of Speeds, fwd | 6 | |
| Number of Speeds, rev | 3 | |
| AXLES | ||
| Front Axle Make | LiuGong Weld axle | |
| Rear Axle Make | Meritor | |
| Differential Type | NO-SPIN limited slip standard | |
| Final Drive Type | chain drive | |
| Axle Oscillation | ±15° | |
| Front Axle Type | all welded steel frame | |
| Front Axle, Wheel Lean Angle | ±17° | |
| STEERING | ||
| Steering Configuration | load sensor steering gear | |
| Steering Relief Pressure | (Mpa) | 17 |
| Minimum Turning Radius | (inches) | 7800(307) |
| Steering Angle | ±45° | |
| Frame Articulation Angle | ±20° | |
| BRAKES | ||
| Service Brake Type | (Dry )shoe | |
| Service Brake Location | ear axle only | |
| Service Brake Actuation | hydraumatic | |
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
