Galvanize Demir Tel

Chain Mesh wire has been specifically developed to suit most types of chain mesh machines. Its high quality enables manufacturers to achieve higher machine efficiencies.

Chain mesh wire is woven into chain mesh fences that are widely used for industrial security, tennis courts, parks, safety fences on freeways, domestic and industrial fencing.

Galvanised Chain Mesh Specifications
Galvanised Wire is made to AS/NZS 4534 "Zinc and zinc/ aluminium-alloy Coatings on Steel Wire"; BS EN 10244.
Given that galvanised wire is classified according to the amount of zinc coating, the following table outlines the difference between standard and heavy galvanised wire.
Nominal Diameter Standard Galv. (g/m2) Heavy Galv. (g/m2)
Over 1.55mm up to and incl 1.80mm 35 180
Over 1.80mm up to and incl. 2.24mm 35 210
Over 2.24mm up to and incl. 2.72mm 40 230
Over 2.72mm up to and incl. 3.15mm 40 250
Over 3.15mm up to and incl. 3.55mm 45 270
Over 3.55mm up to and incl. 4.25mm 45 340

Diameter Tolerances

Nominal Diameter Tolerance
Over 1.00mm up to and incl. 1.60mm +/- 0.02mm
Over 1.60mm up to and incl. 2.50mm +/- 0.03mm
Over 2.50mm +/- 0.03mm

Tensile Strength (MPa)

The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength fro all sizes of Galvanised Chain Mesh is 380 to 500 MPa.

Steel Chemistry

Element %
Carbon Phosphorus Manganese Silicon Sulphur
0.05 max 0.03 max 0.05 max 0.12/0.18 0.30 max