Vakum borusu Güneş suyu Isıtıcısı (SR480/58-36/1.8)

1. European Quality Guarantee
2. High Cost performance
3. Configuration Variations
4. High Performance

Configuration Specification:

Craftwork & Heat preservation The water heater is produced completely according to the international standard EN12975-1. Overall foam molding craftwork is adopted which makes the batch product qualification rate reaches 100%. H≥ 60mm thick and over 36Kg/ m³ High density heat preservation layer is used with SRZ heat locking technology. The average heat loss element USI≤ 12W/( m3. K) while the heat preservation capacity is better

High absorbing efficiency 58/2.1high speed multi-target tubes are adopted-latest vacuum firm coating technology, faster temperature rise under low work condition with higher efficiency. The same day daily heat gathering Q≥ 8.5MJ/m2. The day ending hot water temperature shall ≥ 50° C under good weather.

High temperature water first high temperature water first on the upper water tank layer technology is adopted which has solved the problem that no shower when there is no sufficient sunshine while water temperature is not high enough. And the electricity consumption is lower too.

The overall anti-corrosion level advanced car barking flow line has been imported so as to make the anti-corrosion level of the water heater to a high position.