Kalıp Basıncı Makinesi

1. Machine Type SKMP001-250-7
2. Clamping Unit System
1)The machine adopts hands type of operation, which can guarantee the safety in the operation
2) The pressure and speed of the clamping system are adjustable
3) It uses the imported WIKA shockproof meter to indicate the compound die pressure
4) Five-cylinder integral type clamping unit system
5) It has the soft clamping unit function.
3. Injection System
1) The injection pressure and the injection speed are adjustable
2) The machine uses the imported WIKA shockproof meter to indicate the injection pressure
3) The machine is equipped with the MGP function
4. Temperature Control System
1) Single point of control with 32 temperature points
2) The machine can alarm when the temperature is abnormal
5. Electrical Control and oil hydraulic System
1) It is equipped with the hydraulic motivation and electric heating system. And the power supplies exist separately which can avoid the mutual interference.
2) The control voltage uses the low voltage mode
3) Equipped with the emergency stop button
4) It can alarm with display the warning light when the temperature and position of oil goes beyond the normal range.
5) The oil-way and control valve centralized design, which gains a good cushioning effect.
6. Others
1) Equipped with three-side shield to ensure the safety and cleaning. Furthermore, it alarms and displays the warning light when the machine is not in the good working order.
2) Security light curtains maintain the safety production
3) The table-board thread, ejector rod position, and the sizes of injection bar and thermocouple connection can be customized.
4) Power supply: 380V 50Hz
5) Heating electric power: 220/380V 50Hz
6) Equipped with the independent lighting switch/LS
7) Equipped with two plugs(380V/25A & 220V/15A)
8) It is convenient to operate and change the mould
9) The noise ≤ 70 dB
10) The standard color of machine: Half white half blue ( please refer to the picture)