LPG/Electric/Diesel Powder Coating Machine Electrostatic Powder Coating Curing Oven Factory Price
Powder Coating Ovens are used for curing powder on metal substrates, such as aluminum extrusions, sheet metal, wheels, composite parts, bike frames and various metal geometric shapes. When a thermoset powder is exposed to elevated temperature, it begins to melt, flows out, and then chemically reacts to form a higher molecular weight polymer in a network-like structure.
Features:
1. Quickly assembled insulation cabin, the outside steel plate is powder coated, and the inside steel plate is galvanized.
2. Adopt the assembly structure, easy to disassemble and convenient to transport.
3. Internal and external tracks are steel rails, durable.
4. The cost of consumption is low, the temperature is rising rapidly, and the temperature inside the oven is uniform.
5. Equipped with automatic gas heating control system to accurately control the temperature and thermal insulation time inside the oven.
6. High degree of automation, no pollution of environmental protection, high quality of finished products.
7. The requirements for the power supply system are very low. The oven with general size could work normally at a power supply of 3 to 6Kw. It is especially suitable for the use of power tensions and frequent power restrictions.
8. Energy could be pipeline natural gas, canned liquefied gas or canned natural gas. The optional space is large.
Specification of Powder Coating Oven:
|
Heating system |
Italy Diesel Burner
Heat chamber and Heat exchange tubes are made of 304 and 316 stainless steel. With rock wool insulation. |
|
Circulation system |
Be equipped with a high temperature centrifugal fan;
The fan impeller is made of stainless steel. The fan bearing protection method is liquid circulation cooling protection.
Independently adjustable hot air ducts are arranged inside the chamber to make the temperature in the curing furnace uniform.
The air duct is made by punching and bending with a 0.8mm galvanized sheet. |
|
Guide Rail |
One side equip ground rail used for workpiece entry and exit. |
|
Optional |
With transfer trolley |
|
Control system |
Microcomputer control, dual display digital temperature controller, hot air temperature and oven temperature are automatically controlled.
Fan control, heating control, temperature control, indicator lights for various items, and emergency stop.
Safety device, one set of explosion-proof relief valve, when the pressure inside the curing furnace increases, it will automatically open and discharge the excess air. |
|
Optional Size: |
|
Outer size(L*W*H) |
Outer size(L*W*H) |
|
2850*2300*2400mm |
2650*2100*2000mm |
|
3800*2300*2400mm |
3600*2100*2000mm |
|
4750*2300*2400mm |
4550*2100*2000mm |
|
5700*2300*2400mm |
5500*2100*2000mm |
|
6650*2300*2400mm |
6450*2100*2000mm |
Machine Details:
Wall Panel: Rock wool sandwich panel, 100mm thick, density is 120kg/m³. Outside
is 0.476mm thick colorful steel, inside is 0.476mm thick galvanized steel, anti-flame and heat -insulation.
Heating System( Gas): Made of 304 stainless steel. Italy Riello gas burner.
Temperature Range: Room temp - 200ºC, 1 set of 304 stainless steel heating exchanger.
Cooling System: 1 set of cooling pump and 201 stainless steel water tank to cool the b22earing of circulation fan.
Advantages:
* Easy installation
* Lower using cost
* Energy saving
* Long service lifetime
* 304 stainless steel fan impeller
* The control cabinet is touch screen + PLC, the furnace temperature, hot air temperature, and holding time are automatically controlled (the temperature is only started)
* It is used as a high temperature resistant wheel for workpiece trailers.
Process of Powder Coating:
Step 1: Pre-treatment, to remove the rust and oil on the product's surface.
Step 2: Powder coating manually or automatically.
Step 3: Powder curing in the oven under 180ºC for 20 minutes.
Step 4: Cooling naturally
FAQ:
1. Is it safe to operate the machine?
Our equipment is safe, user-friendly and easy to operate, which provides secure setup and all mechanical units can be controlled well.
2. When I get this machine, but I don't know how to use it. What should I do?
There are videos and English manual together with the machine. Also, our technical team is 24 hours online for service support.
3. If some problems happen to this machine during warranty period, what should I do?
We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sales service. If you have any question,just contact us freely.
4. There are so many machine types, which one should I choose?
It is important to compare all data before choose the best prototype. Also, our sales team provides online services to resolve your confusion, please do feel free to contact us.
5. This is my first time to buy your machine; I have no ideas about the machines quality?
Each machine is strictly produced based on the industrial standard and CE certifications. Our products have CE certifications verified by TÜV SÜD, Bureau Veritas and etc. Customer is our first priority. We are confident in our high quality and reliable services.
6. How about the payment terms?
Wire transfer/Western Union/LC/Cash and so on.
Packing &Shipping:
Reliable Services:
1. All of machines are fully assembled and thoroughly tested and checked prior to shipment.
2. We provide pre-sales technical advisory services, technical maintenance training and operational training services.
3. We provide free repair for main spare parts within warranty period according to warranty agreement.
4. We provide upgrades and maintenance for software system within warranty period.
5. We provide technical maintenance and repair for third-party hardware and software products according to third-party manufacturer's warranty-grade.
6. We provide preferential lifetime maintenance of all equipment, spare parts are charged according to the prevailing market price beyond warranty period.
Denetlenen Tedarikçi 
