Temel bilgiler.
Hayır. Modeli.
GD, ND, WD, TXG etc.
Taşıma Paketi
Wooden Case or Iron Shelf
Teknik Özelikler
20", 13-3/8", 9-5/8", 7", 5-1/2" 5", 4-1/2" etc.
Ürün Açıklaması
Marine casing cutter is one of tools which cuts the casing internally. It uses water horsepower to drive cutters work, it has reasonablestructure and convenient maintenance, faster cutting speed. When cutting multi-layer non-concentric casings, it could bear strenuous vibration. Strong cutter arms can extend to 5 times as much as body diameter, so as to get maximum stability performance under various adverse cutting condition( including hard point, decentration, discontinuous cutting etc).Model | Body OD | CasingSize | Connection |
mm (inch) | inch |
GD111 | 111 (4-3/8) | 5-1/2 ~ 9-5/8 | 2-7/8REG |
GD146 | 146 (5-3/4) | 7 ~ 16 | 3-1/2REG |
GD203 | 203 (8) | 9-5/8 ~ 30 | NC50 |
GD238 | 238 (9-3/8) | 10-3/4 ~ 36 | 6 5/8REG |
GD298 | 298 (11-3/4) | 13-3/8 ~ 60 | 6 5/8REG |
Mechanical internal cutter is a tool which is used for cutting downhole fixed (or stuck) pipe from inner of casing, it can work at any place except joint and coupling.Model | Cutter OD | () Casing/Tubing Size | Cutting Thickness | Connection |
mm (inch) | inch | mm |
ND73 | 57 (2-15/64) | 2-7/8 | 5.5 | 1.9TBG |
ND89 | 67 (2-41/64) | 3-1/2 | 6.5 | 1.9TBG |
ND102 | 85 (3-11/32) | 4 | 5.7 ~ 6.7 | 2-3/8TBG |
ND-114 | 89 (3-1/2) | 4-1/2 | 7.4 ~ 10.9 | 2-3/8TBG |
ND-127 | 102 (4-1/64) | 5 | 5.59 ~ 11 | 2-7/8REG |
ND-140 | 120 (4-23/32) | 5-1/2 | 7~ 9.2 | NC31 |
ND-168 | 149 (5-7/8) | 6-5/8 | 7.3~ 8.9 | NC38 |
ND178 | 146 (5-3/4) | 7 | 5.87~ 13.72 | 4-1/2REG |
ND244 | 212 (8-11/32) | 9-5/8 | 7.92~ 13.84 | 6-5/8REG |
ND340 | 295 (11-39/64) | 13-3/8 | 8.38~ 12.19 | 6-5/8REG |
This type of mechanical external cutter is a mechanical cutting tool that cuts from the outside of casing, tubing, drill pipe, etc. It can cut from outside of pipe and take out the cutting section, it uses spring automatic running, and avoid accident by driller's negligence which cause excessive pulling force and destroy cutter. It is normally connected with washover pipe, so as to cut and take out the pipe at proper position, it needs to change different cutter for different spec. pipes and change the corresponding clamping sleeve.Model | OD | ID | Min. Hole Size | Max. Fish Size | PipeOD | ShearForce |
mm (inch) | mm (inch) | mm (inch) | mm (inch) | mm (inch) | KN |
WD-J114 | 114 (4-1/2) | 82 (3-1/4) | 120.6 (4-3/4) | 79 (3-1/8) | 60 (2-3/8) | 9 |
WD-J154 | 154 (6-1/16) | 124 (4-7/8) | 158.8 (6-1/4) | 120.6 (4-3/4) | 101 (4) | 14 |
WD-J206 | 206 (8-1/8) | 168 (6-5/8) | 219 (8-5/8) | 165 (6-1/2) | 146 (5- 3/4) | 14 |
The washover pipe is a necessary tool for performing washover operation, and washover operation can relieve various of sticking accidents in the well. In addition to rotary washover function, it can also sand washover, salt washover,hot washing and deblockingetc.Model | Pipe OD | Min. Hole Size | Max. Washover Size |
mm (inch) | inch | inch |
TXG114 | 114.3(4-1/2) | 4-3/4 | 3-3/16 |
TXG127 | 127(5) | 5-3/4 | 4 |
TXG140 | 139.7(5-1/2) | 6 | 4-5/8 |
TXG146 | 146.05(5-3/4) | 6-3/8 | 5 |
TXG168 | 168.28(6-5/8) | 7-3/8 | 5-5/8 |
TXG178 | 177.8(7) | 7-7/8 | 6 |
TXG194 | 193.68(7-5/8) | 8-3/8 | 6-5/8 |
TXG203 | 203.2(8) | 8-1/2 | 7 |
TXG206 | 206.38(8-1/8) | 8-1/2 | 7 |
TXG219 | 219.07(8-5/8) | 9-5/8 | 7-3/8 |
TXG229 | 228.6(9) | 9-7/8 | 7-7/8 |
TXG244 | 244.48(9-5/8) | 10-1/2 | 8-3/8 |
TXG273 | 273.05(10-3/4) | 11-7/16 | 9-3/8 |
TXG298 | 298.44(11-3/4) | 12-3/4 | 10-3/8 |
TXG340 | 339.72(13-3/8) | 14-3/8 | 11-7/8 |
TXG406 | 406.4(16) | 17-1/2 | 14 |
Adres:
No. 56th Xingye Road, Yangming District, Mudanjiang, Heilongjiang, China
İşletme Türü:
Üretici/Fabrika
İşletme Aralığı:
Üretim ve İşleme Makineleri
Yönetim Sistemi Sertifikasyonu:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001, HSE
Şirket Tanıtımı:
Şirketimiz, Çin Ulusal Petrol Şirketi′nin (CNPC) Tedarik Ağı′nda birinci sınıf üye, Çin Petrokimya Corporation′ın (SINOPEC) malzeme kaynak piyasasında üye ve Çin Natinal Offshore Oil Corp.′un (CNOOC) birinci sınıf tedarikçisidir. Şirket yeni ürünler tasarlamak, araştırmak ve üretmek için çalışmaktadır ve güçlü teknolojik yeteneklere ve gelişmiş üretim ekipmanlarına sahiptir. ISO9001-2000 sertifikasını almıştır ve API Spec7, Spec7-1, Spec7K, Spec5CT Resmi Monogram Sertifikasyonunu almıştır. Heilongjiang eyaletinde ileri teknoloji şirketi. Şu anda temel olarak yağ delme aletleri üretiyoruz ve on′dan fazla ürün serisi oluşturuldu. Petrol sahasında, tüm yurtiçinde ithal ürünlerin yerine kullanılabilecek çeşitli ürünler bulunmaktadır. Aynı zamanda ürünlerimiz Hindistan, Filipinler, Katar, Singapur, Hindistan, Hindistan, Hindistan, İran, Umman, Suriye, Yemen, Sudan, Cananda, ABD, İngiltere, Norveç, Rusya, Vb. İyi ve geniş bir pazar itibarı kazanmıştır.
Şirketimizin teknik ve hedefi "en yüksek kaliteli ürünleri üretmek, en iyi kalitede hizmet sağlamaktır". Yurt içinde veya dışında yeni ve eski tüketicilerle ve tüm toplum çevreleriyle ürün geliştirme, teknolojik yenilik ve pazarlama ve diğer alanlarda kapsamlı işbirliği yapmak istiyoruz. Ve ortak ve geri kabul etmeme çabalarımız yoluyla Çin ve dünyada petrol sondaj araçlarının geliştirilmesini umuyoruz.