(9240) Pneumatic Stapler for Industry

• Tip: Havalı Zımba
• Kullanım: Wood Packing.Wood Pallet
• Çalışma tarzı: pnömatik
• Hava Anahtarı Tipi: Darbeli pnömatik anahtar
• Pnömatik Matkap Aralığı: İnşaat Makineleri
• Marka: Kya
• Hayır. Modeli.: 9240
• Otomasyon Derecesi: Yarı otomatik
• Tornavida Başlatma Modu: El presinin
• Koşulunu: Yeni
• Özelleştirilmiş: Özelleştirilmiş
• net alet ağırlığı: 1,30 kg (2,86 lb)
• yük kapasitesi: 100 adet
• çalışma basıncı: 60 psi (4 kg/cm2)
• bağlantı elemanlarının uzunluğu: 12 mm - 40 mm
• kol: 1,25 mm x 1,00 mm
• tahminiyle: 18ga.
• taç: 8,90 mm
• güç kaynağı: pnömatik
• i̇ş türü: üretici ve ticari şirket
• oem hizmeti: kullanılabilir
• Taşıma Paketi: According to Your Requirements
• Teknik Özelikler: CE SGS
• Ticari Marka: KYA
• Menşei: China
• HS Kodu: 84671900
• Üretim Kapasitesi: 1000 Sets Per Month

Ürün Açıklaması

Product Description:
 

Name	Air Stapler  9240
Weight	1.30kgs
Load Capacity	100 PCS
Tool Diamensions	240x55x220mm  (9.45X2.17X8.66in.)
Operating Pressure	60-100psi(4-7kgs/cm2)
Staple Crown	8.40mm(0.331" )
Staple Thickness	18 Gauge   1.25x1.05mm(0.050 " x 0.041")
Fasteners Length	12mm-40mm
Usage	Packaging, Construction, Furnituring...
Customized	Customized is available if you provide a drawing or sample
OEM Service	Available

Usage:

Packaging, Construction, Furnituring and so on.

Feature:
 

• "Contact mode"  safety system

 • Light die cast body of aluminum alloy 

 • Bottom loading design

 • Remain nails display available

 • Non-marring tip available

Advantage:
 

1. 300000 working times

2. CE and ISO9001 international certificate

3. Easily broken parts are imported from Taiwan

4. 100% Spare parts can be supplied to you.

5. Very powerful for hard wood

Workshop:



Service and Repars:
 

No.	Symptom		Problems	Solutions
1.1	Air Leak	Air leak in the cylinder cap when tools don't work	1.Loose head valve piston seal or o-rings .	Check and replace the head valve piston set
			2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap	Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2		Air leak in Trigger area  when tools don't work	1.Damaged o-ring in trigger valve	Check and replace  o-ring
			2.Damaged o-ring in trigger valve stem	Check and replace o-ring
			3.Dirt in the trigger valve	Check and clean the trigger valve
1.3		Air leak in cylinder cap when tools are working	1.Damaged head valve piston o-rings	Check and replace  o-rings
			2.Damaged seal under cylinder cap	Check and replace seal
1.4		Air leak in nose when tools are working	1.Worn or damaged bumper	Check and replace bumper
			2.Loose driver(piston unit) thread	Check and replace driver(piston unit)
1.5		Air leak in Trigger area when tools are working	1.Worn or damaged trigger valve head	Check and replace trigger valve head
			2.Damaged head valve piston o-rings	Check and replace head valve piston o-rings
2	Failed to get driver(piston unit) back to the correct position completely.		1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.	Straighten the driver(piston unit)  or verify driver guide(nose) and magazine
			2.Worn or damaged nozzle	Check and replace nozzle
			3.The space between piston o-ring and  cylinder is too tight.	Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3	Work weakly and sluggishly		1. Worn or damaged  piston o-ring	Check and replace piston o-ring
			2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings	Place 2 or 6 drops of oil on o-rings or replace  head valve piston o-rings
			3.Dirt in the nozzle	Check and clean the nozzle
4	Tool jams frequently		1.Damaged or Worn driver (piston unit)	Check and replace driver (piston unit)
			2.Damaged or Worn driver guide (nose)	Check and replace  driver guide (nose)
			3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big	Check and replace driver guide cover
5	Nail can not be shot		1. Driver (piston unit) can't return to the correct position.	Refer to no. 1  Symptom
			2.Driver guide(nose) can not match magazine well	Check and correct the position between driver guide(nose) and magazine
			3.Worn or damaged nail pusher compression spring	Check and replace nail pusher compression spring

 

Company Information:





FAQ:

1.Q:Do you have your own production factory?
   A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China

2.Q: Can you send us samples?
   A: We are pleased to send you the sample to test the quality and market.
 
3.Q: About your products, could you do it OEM?
   A: Yes, OEM service is available.
 
4.Q: Do you also provide spare parts of pneumatic tools? 
    A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.
 
5.Q: For the product, could you spray other color of painting?
    A: Yes, color can be customized.
 
6.Q: What's the delivery time?
    A: It usually takes about 20-30 working days to produce one order.
 
7.Q: How is the payment terms?
    A: Normally T/T 30% in advance and T/T 70% before shipment.
 
8.Q: Can I mix different models in one container?
    A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
   
9.Q: How does your factory do regarding quality control?
      A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
 
10.Q: Do you have quality certification?
      A: Yes, we have CE, SGS,ISO, ect.



Contact Us: