SS304/SS316 Sıhhi Paslanmaz Çelik Otomatik Elektrikli Aktüatör Kelebek Valf Pnömatik Yiyecek/İçecek/kimyasal yapımı için hijyenik sınıfta Kelebek Valf

• Medya: Water/Oil/Drug/Drink/Cosmetic
• Sürüş Modu: Handle/Pneumatic/Electric
• Bağlantı Formu: Clamp/Weld/Thread
• Yapı: Orta sızdırmazlık
• Conta Formu: Sızdırmazlığı sağlanmış
• Valf iğnesi: Normal
• Hayır. Modeli.: ST-V10541
• Çalışma Basıncı: Düşük basınç (PN < 1,6 mpa)
• Çalışma sıcaklığı: Normal sıcaklık (-40°C < T < 120°C)
• Conta yüzeyi malzemesi: Yumuşak Yalıtımlı
• Valf Gövdesi: Forge kaynak
• Standart: 3A/DIN/SMS/En/JIS/Bsi/Rjt, Idf
• Uygulama: Endüstriyel Kullanım, Su Endüstriyel Kullanımı, Dairy/Drink/Cosmetic/Pharmacy
• pnömatik hareket eden: tek davranışlı veya çift davranışlı
• pnömatik kafa: normal kapatma, normal açık, havadan havaya
• gösterge: paslanmaz çelik veya plastik
• braket seçenekleri: tek braket veya çift braket
• silindir seçenekleri: sızdırmaz veya sızdırmaz
• Taşıma Paketi: Bubble Bag/Wooden Box
• Teknik Özelikler: 1/2′′-8′′
• Ticari Marka: SANTHAI
• Menşei: China
• HS Kodu: 8481804090

Ürün Açıklaması

Products Data:
Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meet the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as beer,beverage,dairy food,fruit juice,pharmacy,biological etc.

Technical parameters:

Standard	3A,SMS,DIN,ISO,RJT,IDF
Product wetted steel parts	AISI304/AISI316L	Provided  with material inspection report
Other steel parts	AISI304
Size	1/2"~6",DN10~DN150
Seal material	EPDM/VMQ/FPM	All seals material comply with FDA21CFR117.2600
Working pressure	≤10bar(145psi)
Supply pressure for air actuator	5~8(0~116psi)
Working temperature	EPDM:-14~248ºF(-10~120ºC)
	VMQ:-58~356ºF(-50~180ºC)
	FPM:22~446ºF(-30~230ºC)
	Other materials are avaible upon request
Sterilization temperature	302ºF(150ºC,max 20min)
Outside surface treatment	Ra16~32uin(o.4~0.8um)
Inside surface treatment	Ra32~64uin(o.8~1.6um)
Connetion ends	butt-weld,clamped ends,male ends, flange ends
Pneumatic head	Normally closed(NC)-Air to open,spring to close
	Normally open(NO)-Air to close,spring to open
	Air to air(AA)-Air to open,air to close

Options:
1.The seat and gasket can be NBR (Nitrile), VMQ (Silicone) or Viton (FPM) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3.Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4.Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5.Control: position sensor, C-top controller, C-top controller (AS-I)

Design Features:
1.Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2.Available in sizes from DN25 / 1" to DN300 / 12"
3.Multiposition handles can be used for valves up to DN100 / 4"; 
4.Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle, 
5.pneumatic actuator and electric actuator are interchangeable.
6.Seals comply with FDA 21CFR 177. 2600.
7.The valve body can be customized with a wide selection of different connections.

Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meet the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as beer,beverage,dairy food,fruit juice,pharmacy,biological etc.

Technical Parameter: 

Standard	ISO, 3A, DIN, SMS, IDF, RJT
Flow Medium Parts	304, 304L, 316,316L
Port Size	3/4"~6",DN20~DN150,19mm~152.4mm
Way of Connection	Weld, Thread, Clamp, Flange
Gasket for butterfly valve	Silicone, EPDM, Viton, NBR
Application	It is widely applied to many fileds, such as beer, beverage, dairy food, fruit juice, pharmacy, biological etc
Working principle	Remote-controlled operation by the driving gear or manual operation by handle.
Three drive forms	Normally closed, normally opened and opened and closed by two air flues seperately.
Handle	Metal handle, reinforced nylon handle
	Adjustable handle, built to order according to users' request.
Advantage	1. Sanitary condition passed FDA Certification
	2. With strong resistance to acid, alkali and high temperature
	3. Slight deformation under long-term compression presicion forging valve cartridge. Withstand voltages
	4. Appearance desigh: Keep pace with international latest designs
	5. Service life: Comparable to imported butterfly valve, with 18months warrenty for normal use

Options
1.The seat and gasket can be NBR (Nitrile), VMQ (Silicone) or Viton (FPM) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3.Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4.Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5.Control: position sensor, C-top controller, C-top controller (AS-I)

Design Features
1.Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2.Available in sizes from DN25 / 1" to DN300 / 12"
3.Multiposition handles can be used for valves up to DN100 / 4"; 
4.Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle, 
5.pneumatic actuator and electric actuator are interchangeable.
6.Seals comply with FDA 21CFR 177. 2600.
7.The valve body can be customized with a wide selection of different connections.