Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi SFP28 Direct Attach Cables are compliant with SFF-8432 and SFF-8402 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m).
Up to 25.78125Gbps data rate
Up to 5m transmission
Hot-pluggable SFP 20PIN footprint
Compatible to SFP28 MSA
Compatible to SFF-8402 and SFF-8432
Single 3.3V power supply
Temperature Range: 0 °C to 70 °C
RoHS Compliant
Low EMI radiation Switches, servers and routers
Data Center networks
Storage area networks
High performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
Recommended Operation Condition
| Parameter | Symbol | Min | Max | Unit |
| Operating Case Temperature | Topc | 0 | 70 | degC |
| Storage Temperature | Tst | -40 | 85 | degC |
| Relative Humidity (non-condensation) | RS | 35 | 60 | % |
| Supply Voltage | VCC3 | 3.135 | 3.465 | V |
| Voltage on LVTTL Input | Vilvttl | -0.3 | VCC3 +0.2 | V |
| Power Supply Current | ICC3 | - | 15 | mA |
| Total Power Consumption | Pd | - | 0.05 | W |
| Item | Test Parameter | IEEE802.3bj Specification |
| 1 | Differential Insertion Loss (SDD12) | Maximum insertion loss at 12.8906Ghz @22.48dB Minimum insertion loss at 12.8906Ghz@8dB |
| 2 | Differential Insertion Loss (SDD21) | Maximum insertion loss at [email protected] Minimum insertion loss at 12.8906Ghz@8dB |
| 3 | Differential Return Loss (SDD22) | -16.5+2xSQRT(f) @ 0.01 to 4.1GHz -10.66+14xlog10f/5.5 @4.1 to 19GHz |
| 4 | Differential Return Loss (SDD11) | -16.5+2xSQRT(f) @ 0.01 to 4.1GHz -10.66+14xlog10f/5.5@4.1 to 19GHz |
| 5 | Common Mode Reflection (SCC22) | -2dB @ 0.01 to 19GHz |
| 6 | Common Mode Reflection (SCC11) | -2dB @ 0.01 to 19GHz |
| 7 | Common Mode Conversion (SCD22) | -22+(20/25.78)*(f) @ 0.01 to 12.89GHz -15+(6/25.78)*(f) @ 12.9 to 19GHz |
| 8 | Common Mode Conversion (SCD11) | -22+(20/25.78)*(f) @ 0.01 to 12.89GHz -15+(6/25.78)*(f) @ 12.9 to 19GHz |
| 9 | Differential to Common Mode Conversion Loss (SCD12) | -10dB @ 0.01 to 12.89GHz -27+(29/22)*(f) @ 12.9 to 15.7GHz -6.3dB @ 15.71 to 19GHz |
| 10 | Differential to Common Mode Conversion Loss (SCD21) | -10dB @ 0.01 to 12.89GHz -27+(29/22)*(f) @ 12.9 to 15.7GHz -6.3dB @ 15.71 to 19GHz |
| Pin | Symbol | Name/Description |
| 1 | VEET [1] | Transmitter Ground |
| 2 | Tx_FAULT [2] | Not used |
| 3 | Tx_DIS [3] | Not used |
| 4 | SDA [2] | 2-wire Serial Interface Data Line |
| 5 | SCL [2] | 2-wire Serial Interface Clock Line |
| 6 | MOD_ABS [4] | Module Absent. Grounded within the module |
| 7 | RS0 [5] | Not used |
| 8 | RX_LOS [2] | Loss of Signal indication. Logic 0 indicates normal operation |
| 9 | RS1 [5] | Not used |
| 10 | VEER [1] | Receiver Ground |
| 11 | VEER [1] | Receiver Ground |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled |
| 13 | RD+ | Receiver DATA out. AC Coupled |
| 14 | VEER [1] | Receiver Ground |
| 15 | VCCR | Receiver Power Supply |
| 16 | VCCT | Transmitter Power Supply |
| 17 | VEET [1] | Transmitter Ground |
| 18 | TD+ | Transmitter DATA in. AC Coupled |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled |
| 20 | VEET [1] | Transmitter Ground |
Notes:
1.Module circuit ground is isolated from module chassis ground within the module.
2..should be pulled up with 4.7k - 10k ohms on host board to a voltage between 3.15Vand 3.6V.
3.Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
4.Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted "High" when the SFP+ module is physically absent from a host slot.
5. RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module.
Please visit T&S Communications Co., Ltd. website for more information.
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
