96% 99.6% as Fired Blank Al2O3 Ceramic Substrate Alumina Plate

• Application: Refractory, Structure Ceramic, Industrial Ceramic, Functional Ceramic
• Type: Ceramic Plates
• form verme yöntemi: bant dökümü
• malzemenin saflığı: %96, %99.6 alumina
• özellikler: yüksek mekanik mukavemet, küçük dielektrik kaybı
• kullanım: çıplak seramik devre kartı
• Hayır. Modeli.: JJBP-0111-0002
• i̇steğe bağlı renk: beyaz, fildişi, pembe, siyah
• yoğunluk: 3,70 g/cm3′ün üzerinde
• standart kalınlık: 0.25 - 2,0 mm mevcut
• kalınlık toleransı: ± 0.03 / 0,05 mm (kalınlığa bağlı olarak)
• uzunluk ve genişlik toleransı: ±2 mm
• malzeme: alüminyum seramik
• Taşıma Paketi: Individual Package
• Teknik Özelikler: Max. up to 500mm x 500mm
• Ticari Marka: JingHui
• Menşei: China
• HS Kodu: 8547100000

Ürün Açıklaması

96% 99.6% As Fired Blank Al2O3 Ceramic Substrate Alumina Plate

Features of the Alumina Ceramic Substrate

(1) Good insulation performance and high reliability.

(2) Low dielectric coefficient and good high frequency performance.

(3) Low thermal expansion coefficient (CTE) and high thermal conductivity.

(4) Good air tightness, stable chemical properties, and strong protection for electronic systems.

Applications

Product Parameters

Alumina Ceramic Substrate
Item	Unit		96% Al2O3	99.6% Al2O3
Mechanical Properties
Color	/	/	White	Ivory
Density	Drainage Method	g/cm^3	≥3.70	≥3.95
Light Reflectivity	400nm/1mm	%	94	83
Flexural Strength	Three Point Bending	MPa	>350	>500
Fracture Toughness	Indentation Method	MPa·m^1/2	3.0	3.0
Vickers Hardness	Load 4.9N	GPa	14	16
Young's Modulus	Stretching Method	GPa	340	300
Water Absorption		%	0	0
Camber	/	Length‰	T≤0.3: ≤5‰, Others: ≤3‰	≤3‰
Thermal Properties
Max. Service Temperature (Non-loading)	/	ºC	1200	1400
CTE (Coefficient of Thermal Expansion)	20-800ºC	1×10^-6/ºC	7.8	7.9
Thermal Conductivity	25ºC	W/m·K	>24	>29
Thermal Shock Resistance	800ºC	≥10 Times	No Crack	No Crack
Specific Heat	25ºC	J/kg·k	750	780
Electrical Properties
Dielectric Constant	25ºC, 1MHz	/	9.4	9.8
Dielectric Loss Angle	25ºC, 1MHz	×10^-4	≤3	≤2
Volume Resistivity	25ºC	Ω·cm	≥10^14	≥10^14
Dielectric Strength	DC	KV/mm	≥15	≥15

Product Tolerances

Alumina Ceramic Substrate
Item	Substrate Thickness (mm)	Standard Tolerance (mm)	Best Tolerance (mm)	Laser Cutting Tolerance (mm)
Length and Width Tolerance	/	±2		±0.15
Thickness Tolerance	T<0.3	±0.03	±0.01
	0.30-1.0	±0.05	±0.01
	T>1.0	±10%	±0.01

Surface Roughness
 

Alumina Ceramic Substrate
Material	Surface Roughness (μm)
	As Fired	Lapped	Polished
96% Al2O3	Ra 0.2-0.75	Ra 0.3-0.7	Ra ≤0.05
99.6% Al2O3	Ra 0.05-0.15	Ra 0.1-0.5	Ra ≤0.05

Product Packaging

Because ceramics are hard and brittle materials, each of our products will be packed in a safe and reliable way to avoid damage during transportation.

FAQ

Q1: Can the Size be Customized?
Yes, most of the alumina ceramic substrates are rectangular, square or round in shapes. Our rectangular shapes for as-fired alumina ceramic substrates are available up to 500mm×500mm. We offer customized products for special requirements.

Q2: What is the Maximum ServiceTemperature of the Alumina Ceramic Substrates?
Alumina ceramic substrates can withstand high temperature of 1200-1400 ºC.

Q3: What is the Minimum Thickness of the Alumina Ceramic Substrates?
Our standard thickness: 0.25mm, 0.30mm, 0.38mm, 0.50mm, 0.635mm, 0.76mm, 0.80mm, 0.89mm, 1.0mm, 1.5mm and 2.0mm. Minimum thickness to be 0.1mm. Welcome to inquire about customized services.

Q4: What is the Depth of the Laser Scribing?
The depth of the laser scribing of our ceramic substrate is about 35%-65% of the substrate thickness. The scribing spot can be in different sizes. Generally there are small spot 0.03-0.04mm (Substrate Thickness≤0.5mm ) and large spot 0.08-0.1mm (Substrate Thickness>0.5mm), and the accuracy is ±0.01mm.

Q5: Can Alumina Ceramic Substrates be Polished?
Yes, lapping and polishing will provide the desired flatness and thickness tolerance, with a surface roughness generally below Ra0.05.

Q6: What is the Camber of the Alumina Ceramic Substrates?
Our alumina substrates are 100% inspected for camber. The camber is less than 5‰ for 96% alumina with a thickness below 0.3mm. For 96% alumina with other thicknesses and for other purities, the camber is less than 3‰.

If your question is not listed here, please contact us for more information.