Hitachi UB Serisi için li-ion Yedek Güç Araçları Pil, UB 18DAL, UB 18DSL (BSL1430)

Hitachi BSL 1430 battery

Hitachi 329901 14-Volt 3.0-AMP Hour BSL1430 Lithium Ion Battery

This battery is 14-Volt and 3.0-AMP Hour

Lithium Ion battery

Has three times longer battery life and half the weight of Nickle Cadmium or Nickle Metal Hydride

Maintains a steady level of power throughout charge

The Hitachi 329901 14-Volt 3.0-AMP Hour Lithium Ion Battery BSL1430 is able to produce a steady amount of power throughout charge. This battery is 14-Volt with a capacity of 3.0-AMP hour. The-Voltage directly corresponds to the power output of a cordless tool, and the-AMP hour refers to how long the battery can last before recharging. The lithium ion battery has the best power-to-weight ratio; As they are half the weight of Nickel Cadmium and Nickel Metal Hydride, yet the battery life is three times as long.

The Hitachi 329901 14-Volt 3.0-AMP Hour Lithium Ion Battery BSL1430 is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability.

Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

How to Charge the Li-ion Hitachi BSL 1430 battery?

Claims of fast charging a Li-ion Hitachi BSL 1430 Power Tool Battery in one hour or less usually results in lower charge levels. Such a charger simply eliminates stage two and goes directly into 'ready' once the voltage threshold is reached at the end of stage one. The charge level at this point is about 70%. The topping charge typically takes twice as long as the initial charge.

Depending on the charger and the self discharge of the Hitachi BSL 1430 battery, a topping charge may be implemented once every 500 hours or 20 days. Typically, the charge kicks in when the open terminal voltage drops to 4.05 volts per cell and turns off when it reaches 4.20V/cell.

No trickle charge is applied because the Li-ion Power Tool batteries for Hitachi BSL 1430 Power Tool is unable to absorb overcharge. Trickle charge could cause plating of metallic lithium, a condition that makes the cell unstable. Instead, a brief topping charge is applied to compensate for the small amount of self-discharge the Hitachi BSL 1430 battery and its protective circuit consume.