Tek Bağlantı Noktalı PoE PSE 48V 10 m/100 m/1000 m IP Telefon/Ağ Kamerası

PROCET PT-PSE100 is a single-port integrated power sourcing equipment., and working well during input voltage 100VAC~240VAC. This power supply use CAT5E cable to connect to other network terminal equipment, working with 10/100M network environment Packaging Details: Neutral packing or as your needs size: 134*56*33m packing: 160*65*40mm NW: 0.15kg

Overview
Place of Origin: Guangdong, China (Mainland)
Brand Name: Procet
Model Number: PT- PSE100
Brand: PROCET
Output current: 630mA
Output power: 30W
No. Of Ports: One port
Bandwidth: 100/1000M/1000M
MTBF: > 100k hours
Load: 48VDC± 5%
Output voltage regulation accuracy: 48VDC± 1%
Power over Ethernet Output Pin Assignment and Polarity 1/2(+) 3/6(-) or (4 5+ 7 8- )
Input Power Voltage 100 ~ 280V AC, 50 ~ 60HZ
Output Power Voltage 100 ~ 280V AC
Connectors Shielded RJ-45, EIA 568A and 568B
Operating Ambient Temperature -15 to 55 ° C
Reliability MTBF > 100k hours
Relative humidity 5%~90%RH
Noise of DC output voltage: ≤ 50mv (3.4kHz~150kHz)

Performance:
1. The power supply provides output voltage over-voltage and overload protection.
2. System reliability: MTBF> 100k hours
3. Conducted interference(CE)and Radiated interference(RE): Confirm to EN55022, CLASS B standard.
4. Lightning protection: AC input port can take 1.5KA, 8/20uS surge pulse current for 5 times, with interval of 1 minute.
5. Cooling method and air cooling
6. Noise: < 50dB
7. Open after 5 seconds, output voltage normally.

Environmental Specifications
1. Operating Temperature: -5° C~+55° C
2. Relative Humidity: 5%~90%
3. Places that are ventilated and heat dissipation well, clean, no conductive dust, no corrosive gases.
4. Places without explosion hazard.


Remote power supply protection
Range of output over-voltage protection: -52VDC~-50VDC
Over voltage protection: Input voltage over 290VAC~310VAC
Over voltage recovery point: Input voltage over 285VAC
Under voltage protection: Input voltage under 80VAC~85VAC
Under voltage recovery point: Input voltage under 90VAC
Over-temperature protection: > 100° C

LED instructions
PWR ON: Work properly.
Indicates overload or short-circuit if the green light a few seconds and then turns off.


Installation and Commissioning
1. Plug the input power cord into the 220VAC input socket.
2. Connect to the output signal line
3. Check the connection of lines and ports connected tightly to avoid bad contacts and loose

Notice

1. Installation site must be kept away from heat sources, electromagnetic interference, non-corrosive gas and metal dust.
2. Keep equipment louver ventilative.
3. Keep steady when installing.
4. Taking care input voltage is between 100VAC-240VAC
5. Avoid collision and friction...