| Uygulama: | Yüksek performanslı Transdüser, Üç Fazlı Transdüser, Genel Transdüser, Tek Fazlı Transdüser, Yüksek Frekans Dönüştürücü, Mine Hoist, Winch, Ribbon Conveyer in Mine Industr |
|---|---|
| Çıktı Türü: | Üçlü |
| Çalışma prensibi: | V/F, Vector, Pid, PLC |
| Anahtar Modu: | Yüksek Taşıyıcı Frekansı PWM Kontrolü |
| Ana Devre Türü: | Voltaj |
| Güç Kaynağı gerilimi: | Low / Midium / High Voltage VFD |
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
| Model type | Power KVA |
Input current A |
Output current A |
Matched motor kW |
| EV200-0004G-S2 | 1 | 5.4 | 2.3 | 0.4 |
| EV200-0007G-S2 | 1.5 | 8.2 | 4 | 0.75 |
| EV200-0015G-S2 | 3 | 14 | 7 | 1.5 |
| EV200-0022G-S2 | 4 | 23 | 9.6 | 2.2 |
| EV200-0007G-T4 | 1.5 | 3.4 | 2.1 | 0.75 |
| EV200-0015G-T4 | 3 | 5 | 3.8 | 1.5 |
| EV200-0022G-T4 | 4 | 5.8 | 5.1 | 2.2 |
| EV200-0037G-T4 | 5.9 | 10.5 | 9 | 3.7 |
| EV200-0055G-T4 | 8.9 | 14.6 | 13 | 5.5 |
| Item | Specification | ||
| Basic function |
Highest frequency | Vector control: 0~500Hz; V/F control: 0~500Hz |
|
| Carrier frequency | 0.8kHz ~ 12kHz Carrier frequency can be adjusted automatically according to temperature characteristics | ||
| Input frequency resolution |
Digital setting: 0.01Hz Analog setting: maximum frequency × 0.025% |
||
| control mode | without PG Vector(SVC),Feedback vector(FVC) and V/F control | ||
| Start torque | G type: 0.5Hz/150%(SVC) ; 0Hz/180%(FVC) P type: 0.5Hz/100% |
||
| Speed range | 1: 100 (SVC) |
1: 1000 (FVC) | |
| Speed control accuracy | ±0.5% (SVC) |
±0.02%(FVC) | |
| Torque control accuracy | ±5%(FVC) | ||
| Overload capacity | G type: 150% rated current 60sec; 180% rated current 3sec P type: 120% rated current 60sec; 150% rated current 3sec |
||
| Toruqe boost | Auto-torque boost;manual torque boost 0.1%~30.0% | ||
| V/F curve | Three types:linear type; multi-point type; the N-th power of V/F curve | ||
| V/F Seperation | Two types:full seperation, half seperation | ||
| ACC/DEC curve | Linear or S curve of ACC/DEC ways.Four types of ACC/DEC Time, ACC/DEC time range is 0.0~6500.0s | ||
| DC brake | DC brake frequency: 0.00Hz~ max frequency,brake time:0.0s~36.0s,brake action current: 0.0%~100.0% | ||
| JOG Control | JOG frequency range: 0.00Hz~50.00Hz.JOG speed up/down time: 0.0s~6500.0. | ||
| Simple PLC,multi-stage speed running | Via built-in PLC or control terminal can realize max 16 stage speed running |
||
| Built-in PID | Can realize process control close-loop system conveniently | ||
| Auto-adjust voltage(AVR) | When grid voltage changes,can keep output voltage steadily automatically |
||
| Over current and over voltage speed control | During running,limit current and voltage automatically,protect from tripping off frequently for over voltage and over current. | ||
| Quick current-limit function |
Reduce over current error on max extent,protect inverter normal running | ||
| Torque limitation and control | "digger"feature, inverter could limit torque automatically,prevent over current tripping off;close loop vector can realize torque control. | ||
| Outstanding perform | Using high-perform current vector control | ||
| Instantaneous stop not stop | during instant power-off, by motor feedback energy,inverter compensates voltage-drop to keep running for short time. | ||
| Quick current-limit function | Reduce overcurrent error on max extent | ||
| Timing control | timing control function: setting time range:0.0min~6500.0min | ||
| Multi-motor switch | 2sets of motor parameter, can realize 2motors switching control | ||
| Multi threading bus support Multi threading bus support | Support multiple fieldbus: Modbus, RS85, CANopen,CANlink | ||
| Multi-encoder support | Support differential, open collector, rotary transformer | ||
| Command source | control panel, control terminal, communication; can be switched by several modes | ||
| Frequency source | 10 types of frequency sources: digital setting, analog voltage setting, analog current setting, pulse setting,communication setting, can be switched by several methods | ||
| Auxiliary frequency sources | 10 types of auxiliary frequency source, can realize auxiliary frequency trimming, frequency combining flexiably | ||
| Running display and keypad |
Input terminal | Standard: 7 digital input terminal, one of them support max 100KHz HS pulse input; 2 analog input terminal, one of them support 2 support 0~10V voltage input,one support 0~10V voltage or 0~20mA current input. |
|
| Output terminal | Standard: 1 high-speed pulse output terminal(optional open collector),support 0~100kHzpulse 1 digit output terminals; 2 relay output terminal 2 analog output terminals,one of them support 0~20mA current output; |
||
| LED display | Can display parameter | ||
| Press-key locking and function selection | Realize press-key partial or full locking, define partal press-key function range, to avoid wrong operation | ||
| Protection function | Power-on motor short circuit test,output phase-loss protection, over-current protection, over-voltage protection,under-voltage protection, overheat protection, overload protection etc. | ||
| Optional parts | Differential PG card, open collector PG card,rotary transformer PG card | ||
| Environment | Application site | Indoor, without direct sunlight, no powder, corrosive gas, combustion air, oil dust, water steam, water drop or salt etc. | |
| Altitude level | Less than 1000m | ||
| Environment temperature | -10ºC~+40ºC(During 40ºC~50ºC, please reduce capacity t ouse) | ||
| Humidity | <95%RH, no water drop condensed | ||
| Opitional | Two Panel LED display | LED display;using RJ45 port to connect | |
Ausenist engaged in the research, development, production, sales and service of the inverters. Our company is positioned to serve the industrial equipment manufacturers, we not only provide customers with practical products and convenient services continuously, but also individually tailored product and comprehensive solution for particular industry.
| 1/ Trading FAQ | ||
| 1 | Delivery date: | 1 week ~2 week,depend on quantity |
| 2 | OEM | Accept OEM with your authorization |
| 3 | Packaging Details: | Export standard package or special package according to customer requirement |
| 4 | Payment Term: | T/T, L/C at sight Western Union or others for negotiation |
| 5 | Samples : | Samples will be prepared to sending in about 3-5 working days. |
| 6 | Sample Delivery date: | (And DHL 4-7days; UPS 4-7days; Fedex / TNT 4-8days; EMS 9 days to reach destination) |
| 7 | Quotation Valid: | Price Valid two months. |
| 8 | Warranty : | 18 Months |
| 9 | Market | Europ, Middle East, South America, Asia, Afria etc |
| 2/ Strictly QC management | ||
| 1 | IQC( Income Quality Control) | |
| 2 | IPQC( In process Quality Control) | |
| 3 | FQC( Finish Quality Control) | |
| 4 | OQC( Outgoing Quality Control) | |
| 5 | AGING TEST, LOAD TEST AND SO ON | |
| 3/ Our advantage | ||
| 1 | More than 20 years-- manufacture of frequency inverter | |
| 2 | More than 15 years-- experience in OEM items | |
| 3 | More than 100 countries-- exported | |
| 4 | More than 50 R&D team-- OEM, ODM accepted | |
| 5 | More than 100,000 pcs production capacity per month | |
| 6 | Got NO.6 Inverter brand award in China | |
| 7 | Got ISO9001,CE ,CCC certificates and Own Patent | |
| 8 | Experienced and Professional Automation control solution Provider | |
| 9 | Offer the optional spare parts for frequency inverter & whole solution for automation system. | |
| 4/ Products Brief | ||
| 1 | JT550 Series & D32 Series & EV510 Series | High Performance Vector control VFD |
| 2 | JT300 Series | Economic Vector control VFD |
| 3 | JT580 Series | High Protection VFD with built in DC reactor |
| 4 | JT550 Series | Through-the-wall Vector control VFD |
| 5 | JS500 Series | Construction Lifting Integrated Machine VFD |
| 6 | JS500 Series | Material Lifting Integrated Machine VFD |
| 7 | Synchronous servo drive | |
| 8 | Synchronous moter drive | |
| 9 | Programmable Logic Controller (PLC) | |
| 10 | 3 Phase Permanent Magnet Synchronous High-Efficiency Motor | |
| 11 | KY550 HDMI | |
| 12 | TDS servo system | |
| Power range | 0.4KW-3.7KW | 0.75KW-37KW | Above 37KW | |
| Provision of quality service | Return period | one month | one month | nonsupport |
| Exchange period | 3 month | 3 month | nonsupport | |
| Warranty period | 18 month | 18 month | 18 month | |
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
