Toz Toplayıcı/Çıkarıcı

Model LCDM base pressure long bag pulse bag type dust remover/collector
1Adopting long bag(bag length 6-8m)technology, reduce cover area, increase land utilization rate, low down steel consumption of dust collector noumenon at the meantime;
2Adopting blowing device of high efficiency and low consumption, achieving blowing technology of low pressure and short pulse, low down energy consumption of dust removing;
3The dust remover shell is unit combined structure, which can be divided into single row and two row types, it can select model according to different air flow and site. 4Adopting locellus stopping wind, off-line type pulse blow&clean ash method, no ash twice adsorption, good filter bag regeneration performance; 5It is with on-line overhaul function, can overhaul the single dust chamber under the condition of not stopping dust remover operation. 6 The dust remover sets with flow equalization device and filter bag protection device, ensures the uniformity of the filter bag service life. 7 According to the requirements, the dust remover noumenon can set over-temperature bypass protection system, the flue gas temperature excesses filter bag max bearing temperature, the bypass system can open automatically, and the filter bag is protected. 8 Adopting PIC to control ash cleaning system, achieving automatically cleaning ashes at fixed time or fixed resistance.

Model LFSF counter-blower bag type dust remover
1 It is with unit combined case structure, which is divided into single row and double row types. It is with compact structure, big air flow, it can be combined freely according to different air flow.
2 Adopting microcomputer control and three condition locellus stopping wind counter-blow ash cleaning method, it is with simple ash cleaning structure, good ash cleaning effect, low energy consumption of ash cleaning. 3 The ash cleaning air flow can utilize special set counter-blower, and also can utilize formed by the main blower of dust remover differential pressure air flow, not sets with counter-blower.
4 Adopting inward filtering, there is no frame in filter bag, it is convenient to change filter bag, there is no wear on frame, and lengthening filter bag service life. 5 Adopting slim long filter bag, with low price, low cost and relatively reducing cover area
6 The working temperature is up to 280centidegrees, adopting unit combined structure, can meet the requirements of big air flow.

Model PPDC air box pulse bag type dust remover

1Adopting locellus stopping wind, off-line pulse blowing ashes, avoid ashes cleaned down twice adsorption, increase ashes cleaning effect. There is no injection pipe above the filter bag, and it is convenient to change filter bag.
2Adopting big diameter pulse valve increase injection air capacity, each small chamber uses one piece of pulse valve, lowing down using consumption of pulse valve, small maintenance, low failure rate.
3It is with unit combined case structure and compact structure. It can be divided into single row and double row types, and it can select model according to different air flow and site.
4Adopting PLC to control ash cleaning system, achieving automatically cleaning ashes at fixed time or fixed resistance.

Model ZC-III rotation counter-blow flat bag dust remover
1The cross section of the filter bag is made to be trapezoidal, it is with compact structure and small cover area.
2 Less drive and electric equipment, it is easy to use and maintenance, with less maintenance and safe and reliable operation.
3The shell is designed as per cyclone dust remover, it is with rough dust removing unction and long service life for filter bag.
4The top cover sets with access door, it can rotate freely in 360° , and it is convenient to change bag.
5The shell is round and stresses evenly, which can be used for the purification of explosive flue gas.
6 In the standard specification, inlet gas temperature is less than 130 centidegrees