Lpcb Addressable Alarm System Siren Control Panel for Building

• Type: Fire Alarm Host
• Function: Networked
• Usage: Fire, Smoke
• Certification: CE, ISO, CCC, Lpcb
• Alarm Volume (within 1m): ≥80dB
• Networking Mode: RS485 & Can
• Hayır. Modeli.: AW-FP300
• Wiring Mode: Bus System
• ana şebeke: 230 v ac
• şebeke sigortası: t3,15 al250 v
• güç değeri: i̇mar a=1,2a;i̇mam.b=2,6a;imin=0,65a
• maks. şarj akımı: 1,2 a
• maks. akü besleme akımı: 4 a
• akünün maks. iç direnci: 1,5 litre
• akü sigortası: F8al250V
• önerilen akü kablosu: 14 awg
• sükunet akımı (tam yüklü): 0,4a
• maks. çıkış akımı: 0,5a
• Taşıma Paketi: Carton
• Teknik Özelikler: 430× 560× 170mm
• Ticari Marka: Asewnare
• Menşei: China
• HS Kodu: 8531100000
• Üretim Kapasitesi: 10000 Pieces/Month

Ürün Açıklaması

LPCB Addressable alarm system siren control panel for building


Introduction:
The purpose of the AW-FP300Fire Alarm Control Panel (FACP) is to monitor input signals, give indications and possibly activate outputs as programmed. It is designed to comply with EN 54-2 with qualities of simple installation, operation and easy maintenance. 
The AW-FP300panel is an addressable fire detection panel with 1 loop of 324 addressable points and expansion capabilities.It is compatible with other peripherals made by ASENWARE with its own protocol.

Features:
The AW-FP300 single loop 32 zone fire alarm control panel offers the following features: 
1. Up to 324 addresses on one loop
2. An easy to read, 4.3'' color screen LCD with a resolution of 480×272
3. Zone indication and control panel(ZCP) for 32 zones gives a quick indication of the location of an alarm
4. Record capacity of 1000 historical events for each of historical fire, historical fault and historical operation
5. An independently programmable conventional sounder circuit output
6. Integral power supply and battery
7. Integral printer
8. Flexible and intuitive cause and effect programming on front panel
9. Zone test, point test and module start/stop testing facilitate the commissioning
10. U-disk interface makes the load and save of configuration or historical data convenient for system commissioning and maintenance
11. Hierarchy management with three access levels 
12. Anti-tamper protection by a key lock
13. CAN bus for interconnection of up to 20 FACPs and RS485 for connection with up to 30 fire indicating panels per FACP

Parameters:

Power supply
Mains supply				230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A
Mains fuse				T3.15AL250V
Operating voltage				18.5 ~ 30VDC
Recommended mains cable				Screened or standard/black mains cable, cable size 0.75mm2
Power rating				Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A
Max. charging current				1.2A
Max. battery supply current				4A (when the Mains is disconnected)
Battery capacity, type and recommended model				Max. capacity 2×12V/17Ah; Min. capacity 2×12V/12Ah  VRLA. PS-12170 for 17Ah (Power-sonic), PS12120 for 12Ah (Power-sonic)
Max. internal resistance of battery				1.5Ω
Battery fuse				F8AL250V
Recommended battery cable				14AWG
Quiescent current (full loaded)				< 0.4A
Outputs
S.C. Out (+, -)		Output voltage				18.5 ~ 30VDC
Max. output current				0.5A
Fuse rating				F1AL250V
End of line resistor				4K7
Recommended type of cable				Plain unscreened cable, 1.5mm2
Cable diameter				1mm2 ~2mm2
Transmission distance				≤1500m
Max. number of sounders @50mA				20
F.P.E. Out (+, -)  F.A. Out (+, -)		Output voltage				18.5 ~ 30VDC
Max. output current				0.5A
Fuse rating				F1AL250V
End of line resistor				4K7
Recommended type of cable				Plain unscreened cable, 1.5mm2
Cable diameter				1mm2 ~2mm2
Transmission distance				≤1500m
Fault Out  (NC, COM, NO)		Contact capacity				30VDC@2A, [email protected]
Recommended type of cable				Plain unscreened cable, 1.5mm2
Cable diameter				1mm2 ~ 2mm2
24VK (+, -)	Output voltage				18.5 ~ 30VDC
Max. output current			0.6A
Fuse rating			F1AL250V
Recommended type of cable			Plain unscreened cable, 1.5mm2
Cable diameter			1mm2 ~2mm2
Input
Class change (+, -)	Input mode				Passive
Cable resistance			≤500Ω
Recommended type of cable			Plain unscreened cable, 1.5mm2
Cable diameter			1mm2 ~2mm2
Loop
Loop Out (+, -)  Loop In (+, -)	Output voltage				16.5 ~ 30VDC, pulse
Output current			0 ~0.3A
Loop type			Class A
Recommended type of cable			Screened or unscreened twisted-pair, 1.5mm2
Transmission distance			≤1000m
Cable diameter			1mm2 ~2mm2
Network communication
RS-485	Max. number of FIPs				30
Transmission rate			9600 bps
Recommended type of cable			Screened or unscreened twisted-pair, 1mm2
Transmission distance			≤1000m
Cable diameter			1mm2 ~5mm2
CAN	Max. number of panels				20
Transmission rate			Optional: 10K, 20K, 50K and 100K bps
Recommended type of cable			Screened or unscreened twisted-pair, 1mm2
Transmission distance			≤1000m
Cable diameter			1mm2 ~5mm2
Physical dimensions
Approx. Dimensions of the panel (W×H×D)			430×560×170mm
Approx. weight (without battery)			14kg
Operating conditions
Temperature range: 0°C~45°C; Max relative humidity: 95% (40°C ±2°C, no condensation)

Packaging & Shipping
Packaging Details:
1) PEE bag per unit 
2) Outside Cartons
3)Strict & Standard Export Packing Procedures Adopted Exterior Corrugated Hardboard Carton Interior Blister Buffer Staff, Asenware fire pump control equipment.



Our company
Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.

Contact us
Asenware Ltd
Address:701, Bd 8, Dongfangming Industry Zone, Dabao Rd., Baoan, Shenzhen, China, Zip Code :518101
Phone number: [phone]
 
Company website: http://asenware.en.made-in-china.com

Product range
1. Addressable fire alarm system(FP100 series,2189,2100 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet

Our Services
1.OEM / ODM services.
2.Professional technical team.
3.Offer Free technical support whenever you need
4.Two year warranty and technical maintenance

FAQ 
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
FM200:  two weeks working day
Fire pump: 25 days
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the things according to your request.