Sun Simulator Güneş Paneli Test Makinesi

Sun Simulator Measuring Machine
Application:
Mainly used in automatic test and result record of solar mono-Si, poly-Si and a-Si cell module
Technology characters:
A grade spectrum
A grade unevenness degree of irradiation
A grade instability of irradiation
Flash pulse 10~100ms, continuous adjustable
4-line survey, 14-bit 4-channel high-speed synchronous acquisition.
10 parameters display
8000 data collecting dots
Irradiation &Temperature compensating automatically
Measurement parameter displays in tabulation and graphic way
Voice counts off and prompts
Counting prompt of flash times
24hrs continuous working
Working life of imported xenon lamp is 300, 000 times of flash
Imported PLC control System
Test Parameter:
Isc, Voc, Pmax, Vm, Im, FF, EFF, temp, Rs, Rsh. (Software main interface)
Options:
Manual and automatical sliding tracks match the production line;
Special requests on customization of survey on various solar cell.

1. Maximum Test area: 78.74 inches x 47.24 inches (2000m x1200mm)
2. Light Source
Light uniformity: < 2%
Intensity Instability: < 0.5%
Intensity section range: 500 ~ 1250W/m2
Pulsed xenon lamp lifetime: > 3 million times
Xenon lamp lifetime: > 50 million times
3. Electrical Measurement
Measurement Range: Voltage: 0 ~ 25V, current: 0 ~ 12A
Test Accuracy: Voltage: 0.1%, Current: 0.1%
4. Repeatable test results: < 0.5%
5. Work
Measures the following parameters:
I-V curve, Open circuit voltage (Voc),
Short-circuit current (Isc),
Peak power (Pm),
Current and voltage at peak power (Im and Vm),
Fill factor (F. F. ),
Module efficiency (Eff. ),
Module temperature (Temp).
Single flash automatically measure IV curve and the fixed voltage and current
Data acquisition time: < 2ms
The shortest test interval: 9s
6. Power Supply: 220V