Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi
|
Working Principle: |
Centrifugal |
|
Main applications: |
For water supply For clean liquids,without abrasives, which are non-aggressive to the pump materials For domestic use, for civil and industrial application, for garden use and irrigation |
|
Driver: |
Electric motor |
|
Power Specs: |
220-240V single phase, 220-240V/380-415V three phase 50Hz or 60Hz |
|
Max.permissible fluid temperature: |
-15°C to +70°C(hot water type max 110°C) |
|
Type of connection: |
Inlet thread, hose, flange |
|
Installation position: |
Horizontal |
|
Casing parts material: |
Stainless steel 304 or 316 |
|
Shaft seal type: |
Mechanical seal |
|
Maximum drive rating: |
4KW(6HP) |
|
Maximum caliber: |
50mm(2inch) |
|
Maximum discharge-side pressure: |
0.6MPa(6bar) |
|
Maximum head: |
60m(196.8ft) |
|
Flow rate range: |
0.5-28m3/h(2.2-123.20US.GPM) |
Introduction
1. CHL impeller and wet parts are made of stainless steel.
2. It's with the merits of small size, light weight, compact structure, low noise, easy to install and used.
3. Horizontal multistage non-self-priming centrifugal pump, attached with long shaft electric motor.
4. Axial inlet and radial outlet,most parts adopt stamping technology
5. CHL flow passage components stainless steel 304 or 316, CHLF is stainless steel 304 or 316 segmental type pump body, CHLF(T) is segmental type pump body and discharge are made of cast iron.
CHL, CHLF and CHLF(T) type pump are mainly used in industrial field:
Air-conditioning system
Cooling system
Industrial cleaning
Water treatment (Water purification)
Aquiculture
Fertilizing / metering system
Environmental application
Other special applications
Normal temperature type:-15°C to +70°C
Hot water type: -15°C to 110°C
Ambient temperature: up to +40°C
Max.operation pressure: 10 bar
Max. Inlet pressure is limited by max. Operation pressure
Applicable medium
Thin and clean non-flammable and non-explosive liquid without solid granules and fibers.
Mineral water, soft water, pure water, edible vegetable oil and other light chemical mediums.
When the density or viscosity of to-be-conveyed liquid is larger than that of water, it is necessary to select a driving motor of high-power.
Whether a specific liquid is suitable for the pump depends on many factors, among which the most important ones are chlorine content, PH value, temperature, solvent and oil content.
Q1: What is your product range ?
A: We have the ability to manufacture water pumps of various materials, VFD,valves,etc.And our pumps are including slurry pumps, multi-stage pumps, pipeline pumps,sewage pumps, etc.
Q2: Can you produce according to the samples ?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q3: Is OEM parts available ?
A:Yes, please send me the detailed drawing. Different materials and colors are available.
Q4: how can we guarantee quality ?
A: We Always a pre-production sample before mass production;Always final inspection before shipment;
Q5: What are your advantages ?
A: Rapid development of new products, full range of products, professional service timely quotation and reply promptly, strict quality inspection, strong in after-sales problem solving.
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
