Altıgen cıvatalı Çinko Kaplamalı Çelik manşon ankrajı (M6-M20)

Sleeve Anchor/Sleeve Anchor products/steel sleeve anchor/concrete anchor/expanding anchor/sleeve anchor with hex bolt/anchor bolt/sleeve anchor with hex nut, zp/sleeve anchor with hex nut, zp products, /sleeve anchor, /metal anchor/hex nut sleeve anchor

Material: Carbon steel 4.8, 5.8, 6.8, 8.8 grade are all availabe/stainless steel, garde 304, 316
Assemble: Serrated hex flange nut, coned-shaped rod bolt, sleeve.
Coating: Cr6 zinc/Cr3 zinc, 3-5μ M, WZP of YZP.
Shell type: All type of hole are available
Size: A)Metric:
Anchor diameter: 6.5mm, 8mm, 10mm, 12mm, 16mm, 20mm, working length from 25mm to 300mm
B)Inch:
Outer diameter: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, working length from1-3/8 to 6-1/4
The test pulling force value listed beneath were obtained using 200-250 kgs/cm2 concrete (no aggregated).

Applications:
Light to medium-duty into concrete, brick and block

Technical Informations:
The screws of the anchor have been manufactured under the DIN-933 standard and their quality-hardness is 6.8(I. E. 60 to 80 kg. /mm)
1. The washer is wide, which gives a bigger allowance for pleces or structures to be fastened.
2. While performing the fixing of the anchor, the plastic ring gets deformed. Which fills and blocks the hole of the plece ofr structure to be fastened; This plastics absorbs material irregularities, and-in addition-it is a useful damp-proof plece to inner mechanism of the anchor.
3. Any screw head available as your requirement.

Advantages:
Anchor diameter equals hole diameter-I. E. A sleeve anchor requires a 1/2'' hole
Available in hex head and six other head styles
Available 1/4''-3/4''diameter up to 6-1/4'' length
Zinc plated carbon steel and 304 stainless steel
Provides full 360 hole contact over large area and reduce concrete stress
Heavy -loading capacity
Pre-assembled for faster and easier installations
Dynabolt can be installed through object to be fastened
Sleeve design improves holding power
No pre-spotting of hole necessary