Aşınmaya dayanıklı Endüstriyel astar Malzeme Mikrokristali Slab-9

Industrial microcrystal slabs was developed by China Jingniu Glass Ceramics Group Co. Ltd. The product is a high tech product with R & D cost of RMB1.2 billion which fill the national gap. The Group established the first national standard of Industrial microcrystal slabs in China. The product is made from various mineral waste residues, through the process of melting, rolling and forming, crystallizing, annealing. It is a hi-tech industrial protective material with the properties of high strength, high wear resistant, erosion resistance. The product can massively substitute cast stone, stainless steel, cast iron, UPE high density board, acid-proof brick, granite, marble, etc. The products can be widely applied to the industries of coal, steel, metallurgy, power, chemistry, etc. Such as the bunkers, hopper, sluice scraper device and other locations of surface process. In the meantime, as a building decoration material, the product is a environmental friendly building material with its properties of bright and clean, elegant appearance, without color aberration, no air slaking, no radio contamination.

According to the test and expert testimony: The wear resistant of Industrial Rolling Microcrystal Slabs is 2-3 times higher than that of the common cast stone, 7-8 times higher than that of manganese steel, and 15-20 times higher than that of cast iron; Its erosion resistance is 15-20 times higher than that of stainless steel and rubber, and can be as a substitute of cast stone, manganese steel, cast iron, UPE material, and acid-proof bricks, etc. The products can be widely applied to industries of coal, metallurgy, power, chemical, etc. Such as the bunkers, other material conveying locations & surface process locations.
Application of Rolling Microcrystal Slabs in the steel industry
Iron mill: Ore storage slot, return ore bunker, weighing funnel & other locations.
Sintering plant: Finished product, semi-finished product, mixing silo, Small
Division zipper, etc.
Steel plant: Overhead bunker, central bunker, underground bunker, slag crust
Trough
Coking plant: Coal bunker & coal pit for coal washing system, coke storage
System: Coke bunker, downspouting, etc.

Application of Rolling Microcrystal Slabs in power industry

Coal bin
Coal unloading ditch
Coal hopper of major workshop
Ash bank
Chemical water workshop floor, etc.

Application of Rolling Microcrystal Slabs in the coal industry
Above the ground: Coal preparation plant chute, scraper device medium barrels, etc. Coal silo, loading bunker, etc.
Underground shaft: Coal bin
1. High wear resistance
Rolling Microcrystal Slabs get excellent wear resistant, its wear-resisting extent reaches 0.055g/cm2, which is 2-3 times that of the cast stone (0.09g/cm2), 7-8 times that of manganese steel, 15-20 times that of cast iron.
2. Erosion resistance
The erosion resistance of Rolling Microcrystal Slabs is superior to acid-proof bricks, marble, granite, and common cast stone. It has both acid & alkali resistance, especially it can also be used in the surrounding of the acid & alkali shift.
3. Impact resistance
The impact resistance of Rolling Microcrystal Slabs can reach 3.08KJ/M2, it is 2 times that of common stone, and can meet the need of major material conveying locations.
4. Low friction coefficient
The friction coefficient is only 0.05, its surface becomes more smooth with more usage. No hanging occurs, which avoids blocking the bunker with more material hanging on the surface.
5. Thin & light
The range of the thickness of Rolling Microcrystal Slabs is 8 -20mm. Most cases, the 14mm can simply meet the practical needs. Its specific gravity is only 2.72g/cm3, which is one third of steel, It can increase the inner cubage of the bunker, and decrease the weight of the equipment and the bunker itself.