RFID Desktop Reader Writer for I-Code Sli/Icode Slix/Icode Slis ISO15693 RS232

RFID desktop reader writer for I-CODE SLI/ICODE SLIX/ICODE SLIS ISO15693 RS232
RM530 series contactless reader-writer can read ISO14443A&B ,ISO15693&ISO18092 standard
cards. It realizes connection with the PC machine and associated equipment through
RS232 ,USB , TCP/IP  and WIFI communication. Drive development kinds of
various platforms are provided together with the machine; attached demonstration
programs realize all functions of the access RFID card.
RM530 type of reader-writer is a necessary front-end processing device for
developing contactless card related application products and system integration with
rich and complete interface communication functions. It is widely used in the smart
card management application systems fields.
 
Remark:
 
PS2 Interface is designed for read M-S50(1KB) card, Active reading reader (The reader will read the data from card & output as soon as there is card within the reading range), Read format as below:

1.  Read the card serial number(Default);
2.  Read block data in 0~63(refer to our protocol for setting)
 Popular ordering module NO.:
Hot sell module: 
RM530-H-E         USB interface, Plus and Play, Support  ISO14443A+ISO15693
RM530-U-N         USB interface, Plus and Play, Support NFC
RM530-Q-A         TCP/IP(POE)+WIFI interface, Support ISO14443A
RM530-Q-N         TCP/IP(POE)+WIFI interface, Support  ISO14443A+NFC

Other Options:
 
RM530-S-A         RS232 interface, Support ISO14443A
RM530-S-C         RS232 interface, Support ISO15693
RM530-S-E         RS232 interface, Support ISO14443A+B+ISO15693
RM530-H-A         USB interface, Plus and Play Support  ISO14443A
RM530-H-C         USB interface, Plus and Play Support ISO15693
RM530-U-A         USB interface, Support ISO14443A
RM530-U-C         USB interface, Support ISO15693
RM530-U-E         USB interface, Support ISO14443A+B+ISO15693
RM530-P-A         PS2 interface, Support  ISO14443A
 
Introduction of RM530-U-N, NFC reader/writer: 
This NFC Demo should cooperate with 881 NFC module.
This Demo has following function:
1. Switch Device NFC mode(Read/Write, P2P Initiator, P2P Target, Card Emulation mode(not support yet))
2. Automaticly Read NFC compatible Tag, return NFC Tag's Serial Number.
3.At Read/Write mode, Control normal NFC Tag like read tag, format Tag, clean Tag etc.
4.At CPU card operation mode, Send APDU Command.
5.At P2P Initiator mode, Send NDEF data to another device which is at P2P Target mode.
6.At P2P Target mode, Receive NDEF data from another device which is at P2P Initiator mode.
7.Write or Send NDEF data like URI(URL, Telephone, Message, Email), Text.

Demo shows as below:



Introduction of RM530-Q-N, ISO14443A+NFC,TCP/IP(POE)+WIFI 

This module intergrates full operation for ISO14443A and NFC,with TCP/IP(POE) and WIFI.
Each device has a individual IP address,support poe power supplier.

Demo for clinet shows as below:



Related products range:  (Chips and sizes and material can be customized) 
1.RFID card,PVC card
2.RFID keyfob
3.RFID Wristband
4.RFID label/sticker,NFC tag
5.RFID inlay(rfid wet/dry inlay)
6.RFID Reader (125Khz,13.56Mhz,860-960Mhz)
7. 134.2Khz RFID Handheld Reader for animal tracking
8. RFID Blocking Sleeve / wallet/ holder
9.RFID Glasss Capsule Tag
10.RFID guard tour system




Contact

For more information, welcome to visit our website ramielec.en.made-in-china.com/
Hot-line: +86-15889706529
Tel :86-755-28130420
  
 
pls contact Kerry at  shenzhen rami electronics Co,.ltd with no hesitation. 
Miss Kerry Chen is on your service within 24 hours!